Best Way To Study For MikroTik MTCNA Exam Brilliant MTCNA Exam Questions PDF
Updated Verified Pass MTCNA Exam - Real Questions and Answers
MikroTik MTCNA (MikroTik Certified Network Associate) Exam is a certification program offered by MikroTik, a Latvian company that develops routers and wireless ISP systems. MikroTik Certified Network Associate Exam certification program is designed to equip network engineers with the necessary skills and knowledge to install, configure, and manage MikroTik routers and wireless systems.
The MTCNA exam covers various topics such as network architecture, wireless networking, routing, firewall, and bandwidth management. MTCNA exam consists of multiple-choice questions and is conducted online. It requires a good understanding of the networking fundamentals and MikroTik RouterOS features. MTCNA exam is an excellent opportunity for professionals to demonstrate their expertise in MikroTik technologies and enhance their career prospects.
To prepare for the MikroTik MTCNA certification exam, professionals can opt for MikroTik training courses or study materials available online. MikroTik also provides official training courses for MTCNA certification. The training courses cover all the topics that appear in the certification exam, and professionals can gain hands-on experience in configuring and managing MikroTik routers and networking products.
NEW QUESTION # 95
Mark all the features that can be used for limiting client registrations to your access point:
- A. wpa
- B. registration-table
- C. WDS
- D. access-list
Answer: D
NEW QUESTION # 96
What menus should be used to allow certain websites to be accessed from behind a Hot-Spot interface, without client authentication
- A. ip Hot-Spot walled-garden ip
- B. ip Hot-Spot walled-garden
- C. ip Hot-Spot ip-binding
- D. ip Hot-Spot profile
Answer: B
NEW QUESTION # 97
Select valid subnet masks:
- A. 192.0.0.0
- B. 255.255.192.255
- C. 255.192.0.0
- D. 255.255.224.0
Answer: A,C,D
NEW QUESTION # 98
Which of the following is the valid host range for the subnet on which the IP address 192.168.168.188
255.255.255.192 resides?
- A. 192.168.168.129-190
- B. 192.168.168.128-190
- C. 192.168.168.129-191
- D. 192.168.168.128-192
Answer: A
NEW QUESTION # 99
The DoD model (also called the TCP/IP stack) has four layers. Which layer of the DoD model is equivalent to the Network layer of the OSI model?
- A. Host-to-Host
- B. Network Access
- C. Application
- D. Internet
Answer: D
NEW QUESTION # 100
How many usable IP addresses are there in a 23-bit (255.255.254.0) subnet?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 101
Which default route will be active?
/ip route
add disabled=no distance=10 dst-address=0.0.0.0/0 gateway=1.1.1.1
add disabled=no distance=5 dst-address=0.0.0.0/0 gateway=2.2.2.2
- A. Route via gateway 1.1.1.1
- B. Route via gateway 2.2.2.2
Answer: B
NEW QUESTION # 102
If ARP=reply-only is configured on an interface, what will this interface do
- A. Accept all MAC-addresses listed in /ip arp as static entries
- B. Accept all IP addresses listed in /ip arp as static entries
- C. Add new IP addresses in /ip arp list
- D. Accept all IP/MAC combinations listed in /ip arp as static entries
- E. Add new MAC addresses in /ip arp list
Answer: D
NEW QUESTION # 103
Evaluate the following information:
Access Point configuration:
-- wlan1 is in 'AP-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
CPE configuration:
-- wlan1 is in 'Station-Bridge' mode
-- Bridge1 has wlan1 and ether1 as ports
Select protocols that will pass from ether1 on the CPE to ether1 on the Access Point.
- A. USB
- B. ARP
- C. BGP
- D. Firewire
- E. IPv4
- F. DHCP
- G. PPPoE
- H. IPv6
Answer: B,E,F,G,H
NEW QUESTION # 104
Mark all correct answers.
- A. Wireless access-list could allow and deny connect to your AP
- B. Default-Forwarding could be enabled for a specific clients by wireless access-list
- C. The only way to prevent wireless clients connections - disable wireless interface
- D. /ip firewall filter allows to deny authentication to AP
Answer: A
NEW QUESTION # 105
For a Simple Queue to apply a bandwidth restrictions on a bridged interface, following must be done:
- A. Enable 'Use IP Firewall' in bridge settings
- B. Configure an IP address on the bridge interface
- C. Use mangle to mark the connections
- D. Associate the Simple Queue to the bridge interface
Answer: C
NEW QUESTION # 106
If ARP=reply-only is configured on an interface, tcarmehis interface will
- A. add new MAC addresses in '/ip arp' list
- B. accept IP and MAC address combinations listed in '/ip arp' list
- C. accept all MAC-addresses listed in '/ip arp' as static entries
- D. add new IP addresses in '/ip arp' list
- E. accept all IP addresses listed in '/ip arp' as static entries
Answer: E
NEW QUESTION # 107
Which computers would be able to communicate directly (without any routers involved):
- A. 10.5.5.1/24 and 10.5.5.100/25
- B. 192.168.0.5/26 and 192.168.0.100
- C. 192.168.17.15/29 and 192.168.17.20/28
- D. 10.10.0.17/22 and 10.10.1.30/23
Answer: A,D
NEW QUESTION # 108
Which is a default baud-rate of currently manufactured RouterBOARDs?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION # 109
What protocol does PPP use to identify the Network layer protocol?
- A. HDLC
- B. NCP
- C. LCP
- D. ISDN
Answer: B
NEW QUESTION # 110
Destination NAT (chain dstnat, action dst-nat) can be used to:
- A. Direct users from the Internet to a server within your local network
- B. Change destination port
- C. Change source port
- D. Hide your local network from the Internet
Answer: B
NEW QUESTION # 111
......
Updated PDF (New 2024) Actual MikroTik MTCNA Exam Questions: https://www.testsdumps.com/MTCNA_real-exam-dumps.html
Dumps Moneyack Guarantee - MTCNA Dumps Approved Dumps: https://drive.google.com/open?id=17RWOXYKjz1QxBRqvitndi6hEBa-5rMf5
