D-VXR-DY-23 Study Guide Brilliant D-VXR-DY-23 Exam Dumps PDF
View D-VXR-DY-23 Exam Question Dumps With Latest Demo
NEW QUESTION # 99
What would be the result if no value is entered for "NTP Server(s)" in the First Run Wizard during VxRail deployment?
- A. Validation test fails
- B. Time from the BIOS on the first ESXi host is used
- C. Review and Validate screen shows a red "X"
- D. Time is set to UTC
Answer: B
NEW QUESTION # 100
Which requirement is optional for a VxRail Stretched Cluster?
- A. External vCenter
- B. IPv6 Multicast between locations
- C. Cross-site layer-2 connectivity
- D. Enterprise Plus vSphere Licensing
Answer: B
NEW QUESTION # 101
Which port configuration is invalid on the integrated NIC of a VxRail node?
- A. 2 x 10 GbE SFP+
- B. 2 x 25 GbE SFP28
- C. 2 x 10 GbE RJ45
- D. 2 x 1 GbE RJ45
Answer: D
NEW QUESTION # 102
What is required to perform an Internet upgrade of a VxRail cluster?
- A. Download Composite Upgrade Metadata .zip files
- B. Dell Secure Remote Services
- C. Dell Technologies Support Account
- D. Enable vSphere Lifecycle Manager
Answer: C
NEW QUESTION # 103
What is the difference between Compression only and Deduplication and compression on a VxRail vSAN cluster?
- A. Compression only: A failed capacity disk causes the disk group to go offline Deduplication and compression: A failed capacity disk does not impact the entire disk group
- B. Compression only: A failed capacity disk does not impact the entire disk group Deduplication and compression: A failed capacity disk causes the disk group to go offline
- C. Compression only: Added capacity disk requires a disk group rebuild
Deduplication and compression: Added capacity disk does not require a disk group rebuild - D. Compression only: Does not require a rolling reformat of the disks when enabled Deduplication and compression: Requires a rolling reformat of the disks when enabled
Answer: B
NEW QUESTION # 104
What issue is one of the top reasons for failing to deploy SRS/VE in a VxRail environment?
- A. NTP drift
- B. LCM errors
- C. Excessive latency
- D. DNS resolution failure
Answer: D
NEW QUESTION # 105
Which VxRail Series is designed to support a VDI environment and requires a GPU card in each host?
- A. G Series
- B. S Series
- C. P Series
- D. V Series
Answer: D
NEW QUESTION # 106
You are attempting to reset a single G Series node running 4.0.x code to the factory default. You discover that the configbundle.tgz file is corrupt.
What is the recommended method to recover the node?
- A. Mobile Build Server
- B. Reset Script
- C. Node Replacement
- D. Rapid Appliance Self Recovery
Answer: A
NEW QUESTION # 107
A customer requires a VxRail Stretched Cluster with E560F nodes in its minimal configuration. In addition, the cluster should be able to use both erasure coding options.
Which setup fulfills the requirement?
- A. 6+6 nodes
- B. 3+3 nodes
- C. 4+4 nodes
- D. 8+8 nodes
Answer: B
NEW QUESTION # 108
What accurately describes the positioning of a VxRail?
- A. Can start small and grow with a low entry cost
- B. Converged architecture with enterprise grade resiliency
- C. Software defined solution with rack scale and integrated networking
- D. Can start small and grow to hundreds of nodes
Answer: B
NEW QUESTION # 109
In a VxRail internal vCenter deployment, which component(s) are automatically licensed?
- A. vCenter only
- B. None
- C. vCenter and vSAN
- D. vSAN only
Answer: D
NEW QUESTION # 110
In addition to the VxRail YouTube video, links to what resources should the SE send to the customer, according to the VxRail PEQ Engagement Details worksheet?
- A. VxRail QuickStart Guide VxRail Network Guide
- B. VxRail vCenter Server Planning Guide Network Validation Tool
- C. VxRail vCenter Server Planning Guide VxRail Network Guide
- D. VxRail QuickStart Guide Network Validation Tool
Answer: D
NEW QUESTION # 111
What is the remote management option for G Series VxRail nodes?
- A. iDRAC
- B. iLO
- C. IPMI/BMC
- D. RMM
Answer: C
NEW QUESTION # 112
A customer is running a 5-node VxRail all flash cluster with vSAN advanced licensing. They are unable to apply a RAID-6 Erasure Coding storage policy to the VMs.
What could be the cause?
- A. RAID-6 Erasure Coding is only supported with stretched clusters.
- B. vSAN license level is incorrect and needs upgrading.
- C. Incorrect number of failure domains in the cluster.
- D. VxRail cluster only supports mirroring with an FTT of 1.
Answer: C
NEW QUESTION # 113
A VxRail cluster is being deployed with the VxRail Deployment Wizard.
For which IP addresses must FQDNs be resolved by DNS?
- A. All VxRail ESXi nodes, vRealize Operation Manager, and VxRail Manager VM
- B. All VxRail ESXi nodes, vCenter Server, and VxRail Manager VM
- C. Only the first VxRail ESXi node, vCenter Server, and VxRail Manager VM
- D. vCenter Server and VxRail Manager VM only
Answer: B
NEW QUESTION # 114
......
Free D-VXR-DY-23 Test Questions Real Practice Test Questions: https://www.testsdumps.com/D-VXR-DY-23_real-exam-dumps.html
D-VXR-DY-23 Dumps Updated Nov 28, 2024 WIith 345 Questions: https://drive.google.com/open?id=1orlNc3n_XRecnRenUJWo43UoP6_1l3Qw
