Dependable NSE4_FGT-7.0 Exam Dumps to Become Fortinet Certified
Get Ready with NSE4_FGT-7.0 Exam Dumps (2023)
The Fortinet NSE4_FGT-7.0 (Fortinet NSE 4 - FortiOS 7.0) Exam is a certification exam that tests the knowledge and skills of IT professionals in configuring, managing, and troubleshooting Fortinet Security Fabric solutions. This exam covers the latest version of FortiOS, which is FortiOS 7.0, and is designed for individuals who are responsible for the day-to-day management of Fortinet security solutions.
NEW QUESTION # 102
When configuring a firewall virtual wire pair policy, which following statement is true?
- A. Any number of virtual wire pairs can be included in each policy, regardless of the policy traffic direction settings.
- B. Any number of virtual wire pairs can be included, as long as the policy traffic direction is the same.
- C. Exactly two virtual wire pairs need to be included in each policy.
- D. Only a single virtual wire pair can be included in each policy.
Answer: B
Explanation:
Reference: https://kb.fortinet.com/kb/documentLink.do?externalID=FD48690
NEW QUESTION # 103
An administrator is configuring an Ipsec between site A and siteB. The Remotes Gateway setting in both sites has been configured as Static IP Address. For site A, the local quick mode selector is 192.16.1.0/24 and the remote quick mode selector is 192.16.2.0/24. How must the administrator configure the local quick mode selector for site B?
- A. 192.168.3.0/24
- B. 192.168.1.0/24
- C. 192.168.0.0/8
- D. 192.168.2.0/24
Answer: D
NEW QUESTION # 104
What devices form the core of the security fabric?
- A. Two FortiGate devices and one FortiManager device
- B. Two FortiGate devices and one FortiAnalyzer device
- C. One FortiGate device and one FortiAnalyzer device
- D. One FortiGate device and one FortiManager device
Answer: B
NEW QUESTION # 105
Examine the network diagram shown in the exhibit, then answer the following question:
Which one of the following routes is the best candidate route for FGT1 to route traffic from the Workstation to the Web server?
- A. 10.4.200.0/30 is directly connected, port2
- B. 172.16.32.0/24 is directly connected, port1
- C. 172.16.0.0/16 [50/0] via 10.4.200.2, port2 [5/0]
- D. 0.0.0.0/0 [20/0] via 10.4.200.2, port2
Answer: B
NEW QUESTION # 106
An organization's employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent the SSL VPN negotiation failure?
- A. Change the session-ttl.
- B. Change the idle-timeout.
- C. Change the udp idle timer.
- D. Change the login timeout.
Answer: D
Explanation:
FortiGate_Security_7.0 page 607
NEW QUESTION # 107
Refer to the exhibit.
Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?
- A. Read/Write permission for Firewall
- B. CLI diagnostics commands permission
- C. Read/Write permission for Log & Report
- D. Custom permission for Network
Answer: B
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD50220
NEW QUESTION # 108
If Internet Service is already selected as Source in a firewall policy, which other configuration objects can be added to the Source filed of a firewall policy?
- A. Once Internet Service is selected, no other object can be added
- B. IP address
- C. User or User Group
- D. FQDN address
Answer: C
Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.2.5/cookbook/179236/using-internet-service-in-policy Service : This option is only available when Destination Internet Service is off. So if you are on source you should be able to add users and groups, I didn't test but as per theory that is what is looks like.
https://docs.fortinet.com/document/fortimanager/6.2.1/administration-guide/663598/create-new-firewall-policy
NEW QUESTION # 109
What is the primary FortiGate election process when the HA override setting is disabled?
- A. Connected monitored ports > System uptime > Priority > FortiGate Serial number
- B. Connected monitored ports > Priority > System uptime > FortiGate Serial number
- C. Connected monitored ports > Priority > HA uptime > FortiGate Serial number
- D. Connected monitored ports > HA uptime > Priority > FortiGate Serial number
Answer: D
NEW QUESTION # 110
Refer to the exhibit.
The exhibit displays the output of the CLI command: diagnose sys ha dump-by vcluster.
Which two statements are true? (Choose two.)
- A. FortiGate SN FGVM010000065036 HA uptime has been reset.
- B. FortiGate SN FGVM010000064692 is the primary because of higher HA uptime.
- C. FortiGate devices are not in sync because one device is down.
- D. FortiGate SN FGVM010000064692 has the higher HA priority.
Answer: A,D
Explanation:
1. Override is disable by default - OK
2. "If the HA uptime of a device is AT LEAST FIVE MINUTES (300 seconds) MORE than the HA Uptime of the other FortiGate devices, it becomes the primary" The question here is : HA Uptime of FGVM01000006492 > 5 minutes? NO - 198 seconds < 300 seconds (5 minutes) Page 314 Infra Study Guide.
https://docs.fortinet.com/document/fortigate/6.0.0/handbook/666653/primary-unit-selection-with-override-disabled-default
NEW QUESTION # 111
By default, FortiGate is configured to use HTTPS when performing live web filtering with FortiGuard servers.
Which CLI command will cause FortiGate to use an unreliable protocol to communicate with FortiGuard servers for live web filtering?
- A. set webfilter-cache disable
- B. set webfilter-force-off disable
- C. set fortiguard-anycast disable
- D. set protocol tcp
Answer: C
NEW QUESTION # 112
Which three methods are used by the collector agent for AD polling? (Choose three.)
- A. WMI
- B. WinSecLog
- C. NetAPI
- D. FortiGate polling
- E. Novell API
Answer: A,B,C
NEW QUESTION # 113
Which two statements about antivirus scanning mode are true? (Choose two.)
- A. In proxy-based inspection mode, antivirus scanning buffers the whole file for scanning, before sending it to the client.
- B. In flow-based inspection mode, FortiGate buffers the file, but also simultaneously transmits it to the client.
- C. In proxy-based inspection mode, files bigger than the buffer size are scanned.
- D. In flow-based inspection mode, files bigger than the buffer size are scanned.
Answer: A,B
Explanation:
An antivirus profile in full scan mode buffers up to your specified file size limit. The default is 10 MB. That is large enough for most files, except video files. If your FortiGate model has more RAM, you may be able to increase this threshold. Without a limit, very large files could exhaust the scan memory. So, this threshold balances risk and performance. Is this tradeoff unique to FortiGate, or to a specific model? No. Regardless of vendor or model, you must make a choice. This is because of the difference between scans in theory, that have no limits, and scans on real-world devices, that have finite RAM. In order to detect 100% of malware regardless of file size, a firewall would need infinitely large RAM-something that no device has in the real world. Most viruses are very small. This table shows a typical tradeoff. You can see that with the default 10 MB threshold, only 0.01% of viruses pass through.
NEW QUESTION # 114
View the exhibit:
Which the FortiGate handle web proxy traffic rue? (Choose two.)
- A. port1-VLAN10 and port2-VLAN10 can be assigned to different VDOMs.
- B. Traffic between port1-VLAN1 and port2-VLAN1 is allowed by default.
- C. Broadcast traffic received in port1-VLAN10 will not be forwarded to port2-VLAN10.
- D. port-VLAN1 is the native VLAN for the port1 physical interface.
Answer: A,C
NEW QUESTION # 115
Refer to the exhibit.
Which contains a session list output. Based on the information shown in the exhibit, which statement is true?
- A. Destination NAT is disabled in the firewall policy.
- B. One-to-one NAT IP pool is used in the firewall policy.
- C. Overload NAT IP pool is used in the firewall policy.
- D. Port block allocation IP pool is used in the firewall policy.
Answer: B
Explanation:
FortiGate_Security_6.4 page 155 . In one-to-one, PAT is not required.
NEW QUESTION # 116
Which CLI command allows administrators to troubleshoot Layer 2 issues, such as an IP address conflict?
- A. get system performance status
- B. get system arp
- C. get system status
- D. diagnose sys top
Answer: B
Explanation:
Explanation
"If you suspect that there is an IP address conflict, or that an IP has been assigned to the wrong device, you may need to look at the ARP table."
NEW QUESTION # 117
An administrator needs to increase network bandwidth and provide redundancy.
What interface type must the administrator select to bind multiple FortiGate interfaces?
- A. Software Switch interface
- B. VLAN interface
- C. Redundant interface
- D. Aggregate interface
Answer: D
Explanation:
Reference:
https://www.fortinetguru.com/2016/12/aggregate-interfaces/
NEW QUESTION # 118
Which security feature does FortiGate provide to protect servers located in the internal networks from attacks such as SQL injections?
- A. Denial of Service
- B. Application control
- C. Antivirus
- D. Web application firewall
Answer: D
Explanation:
Reference:
WAF is situated or facing internal servers such as Web Servers with purpose of protecting them from attacks such as XSS,SQL Inj, DOS,...
NEW QUESTION # 119
Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)
- A. FortiGuaid update servers
- B. Operating mode
- C. NGFW mode
- D. System time
Answer: B,C
Explanation:
Explanation
C: "Operating mode is per-VDOM setting. You can combine transparent mode VDOM's with NAT mode VDOMs on the same physical Fortigate.
D: "Inspection-mode selection has moved from VDOM to firewall policy, and the default inspection-mode is flow, so NGFW Mode can be changed from Profile-base (Default) to Policy-base directly in System > Settings from the VDOM" Page 125 of FortiGate_Infrastructure_6.4_Study_Guide
NEW QUESTION # 120
An organization's employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent the SSL VPN negotiation failure?
- A. Change the session-ttl.
- B. Change the idle-timeout.
- C. Change the udp idle timer.
- D. Change the login timeout.
Answer: D
Explanation:
Explanation
FortiGate_Security_7.0 page 607
NEW QUESTION # 121
Refer to the exhibit.
An administrator has configured a performance SLA on FortiGate, which failed to generate any traffic.
Why is FortiGate not sending probes to 4.2.2.2 and 4.2.2.1 servers? (Choose two.)
- A. The Detection Mode setting is not set to Passive.
- B. The Enable probe packets setting is not enabled.
- C. The configured participants are not SD-WAN members.
- D. Administrator didn't configure a gateway for the SD-WAN members, or configured gateway is not valid.
Answer: B,D
NEW QUESTION # 122
Which of the following statements about central NAT are true? (Choose two.)
- A. IP tool references must be removed from existing firewall policies before enabling central NAT.
- B. Central NAT can be enabled or disabled from the CLI only.
- C. Source NAT, using central NAT, requires at least one central SNAT policy.
- D. Destination NAT, using central NAT, requires a VIP object as the destination address in a firewall.
Answer: A,B
NEW QUESTION # 123
......
The Fortinet NSE4_FGT-7.0 exam is designed to test the knowledge and skills of network security professionals in configuring, managing, and troubleshooting Fortinet's FortiOS 7.0 operating system. The exam is targeted towards individuals who have experience in network security and have completed the Fortinet NSE 4 training program.
Achieving the Fortinet NSE4_FGT-7.0 certification can provide a number of benefits for network security professionals. It can help individuals showcase their expertise in Fortinet's FortiOS 7.0 platform, which can lead to new job opportunities and higher salaries. It can also help organizations identify individuals who are qualified to manage and secure their network infrastructures using Fortinet's solutions. Additionally, certified professionals can stay up-to-date with the latest technology and best practices in network security, which can help them stay ahead of the curve in their careers.
Download Exam NSE4_FGT-7.0 Practice Test Questions with 100% Verified Answers: https://www.testsdumps.com/NSE4_FGT-7.0_real-exam-dumps.html
Realistic NSE4_FGT-7.0 Dumps are Available for Instant Access: https://drive.google.com/open?id=1-DHvh4Za7104fOYNmWIHO5trt3dqGIuu
