[Full-Version] 2023 New TestsDumps PCNSE PDF Recently Updated Questions
PCNSE Exam with Guarantee Updated 211 Questions
How to Prepare for Palo Alto Networks Certified Network Security Engineer PCNSE Exam
Preparation Guide for Palo Alto Networks Certified Network Security Engineer PCNSE Exam
Introduction
Palo Alto Networks Certified Network Security Engineer PCNSE Exam is related to Palo Alto Networks Certification. This exam validates the Candidate ability to design, deploy, configure and maintain the vast majority of power Alto Networks base network security implementations. System Configuration Engineer, Pre-sales System Engineers, System Integrators usually hold or pursue this certification and you can expect the same job role after completion of this certification.
The Palo Alto Networks Certified Network Security Engineer (PCNSE) is a formal, third-party proctored certification that indicates that those who have achieved it possess the in-depth knowledge to design, install, configure, maintain, and troubleshoot most implementations based on the Palo Alto Networks platform.
This exam will certify that the successful candidate has the knowledge and skills necessary to implement the Palo Alto Networks Next-Generation Firewall PAN-OS 10.0 platform in any environment.
The PCNSE exam should be taken by anyone who wants to demonstrate a deep understanding of Palo Alto Networks technologies, including customers who use Palo Alto Networks products, value-added resellers, pre-sales system engineers, system integrators, and support staff.
Candidate should have three to five years' experience working in the Networking or Security industries and the equivalent of 6 to 12 months' experience deploying and configuring Palo Alto Networks NGFW within the Palo Alto Networks product portfolio.
- You understand networking and Security policies used by PAN-OS software.
- You have product expertise and understand the unique aspects of the Palo Alto Networks product portfolio and how to deploy one appropriately.
- You can plan, deploy, configure, operate, and troubleshoot Palo Alto Networks Product portfolio components.
You will need to gather the public IP addresses, private network prefixes, and serial numbers of your branch and hub firewalls. The firewall must have an internet-routable, public IP address to initiate and terminate IPsec tunnels and route application traffic to and from the internet.
As part of the planning process you will decide on the naming conventions for your sites and SD-WAN devices. If you already have zones in place before configuring SD-WAN, you should decide how to map those zones to the predefined zones that SD-WAN uses for path selection. You will map an existing zone to a predefined zone named zone-internal, To_Hub, To_Branch, or zone-internet.
The benefit in Obtaining the PCNSE Exam Certification
- Becoming Palo Alto Networks Certified Network Security Engineer means one thing you are worth more to the company and therefore more to yourself in the form of an upgraded pay package. On average a Palo Alto Networks Certified Network Security Engineer member of staff is estimated to be worth 30% more to a company than their uncertified professionals.
- When Candidates applying for a job or looking to promotion in their current position, an Palo Alto Networks Certified Network Security Engineer certification in the field in which Candidates are applying will put you at the top of the list and make them a desirable candidate for employers.
- Organization owners invest a lot in their employees when it comes to their training with the goal of making them quicker, more efficient, and more knowledgeable about their role. Certified Professional will reduce the time he spends on tasks, meaning he can get more done this could help reduce company downtime when repairing faults on a system or fixing hardware problems.
- Candidates will get in-depth knowledge by completing the courses along with the access to revision materials for 6 months upon completion means they will have a wider skill set when it comes to the various technologies and systems than an uncertified professional. Certified Professional in this particular skill set is 74% more efficient when it comes to completing their tasks in a timely well-executed manner.
- After completion of Palo Alto Networks Certified Network Security Engineer Certification candidates receive official confirmation from Palo Alto that you are now fully certified in their chosen field. This can be now added to their CV, cover letters and job applications.
NEW QUESTION 96
Which two features does PAN-OS software use to identify applications? (Choose two)
- A. port number
- B. session number
- C. application layer payload
- D. transaction characteristics
Answer: A,C
Explanation:
Explanation
https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-admin/app-id/application-level-gateways#
NEW QUESTION 97
An administrator has been asked to create 100 virtual firewalls in a local, on-premise lab environment (not in "the cloud"). Bootstrapping is the most expedient way to perform this task.
Which option describes deployment of a bootstrap package in an on-premise virtual environment?
- A. Use config-drive on a USB stick.
- B. Use a virtual CD-ROM with an ISO.
- C. Use an S3 bucket with an ISO.
- D. Create and attach a virtual hard disk (VHD).
Answer: B
Explanation:
Reference: https://www.paloaltonetworks.com/documentation/71/pan-
os/newfeaturesguide/management-features/bootstrapping- firewalls-for-rapid-deployment.html
NEW QUESTION 98
An administrator accidentally closed the commit window/screen before the commit was finished.
Which two options could the administrator use to verify the progress or success of that commit task? (Choose two.)
- A.
- B.
- C.
- D.
Answer: A,C
Explanation:
No Decryption profile (Objects > Decryption > Profile > No Decryption) controls server verification checks for traffic that you choose not to decrypt as defined in "No Decryption" Decryption policies to which you attach the profile.
Server Certificate Verification
Block sessions with expired certificates
Block sessions with untrusted issuers
https://docs.paloaltonetworks.com/pan-os/9-1/pan-os-admin/decryption/decryption-concepts/no-decryption-decryption-profile.html
NEW QUESTION 99
What happens when an A P firewall cluster synchronies IPsec tunnel security associations (SAs)?
- A. Phase 1 SAs are synchronized over HA1 links
- B. Phase 1 and Phase 2 SAs are synchronized over HA3 links
- C. Phase 2 SAs are synchronized over HA2 finks
- D. Phase 1 and Phase 2 SAs are synchronized over HA2 links
Answer: C
Explanation:
Explanation
From the Palo Alto documentation below, "when a VPN is terminated on a Palo Alto firewall HA pair, not all IPSEC related information is synchronized between the firewalls... This is an expected behavior. IKE phase 1 SA information is NOT synchronized between the HA firewalls." And from the second link, "Data link (HA2) is used to sync sessions, forwarding tables, IPSec security associations, and ARP tables between firewalls in the HA pair. Data flow on the HA2 link is always unidirectional (except for the HA2 keep-alive). It flows from the active firewall to the passive firewall."
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA14u000000HAuZCAW&lang=en_US%E
https://help.aryaka.com/display/public/KNOW/Palo+Alto+Networks+NFV+Technical+Brief
NEW QUESTION 100
Below are the steps in the workflow for creating a Best Practice Assessment in a firewall and Panorama configuration Place the steps in order.
Answer:
Explanation:
Reference:
https://www.paloaltonetworks.com/resources/videos/how-to-run-a-bpa
NEW QUESTION 101
Click the Exhibit button
An administrator has noticed a large increase in bittorrent activity. The administrator wants to determine where the traffic is going on the company.
What would be the administrator's next step?
- A. Click on the bittorrent application link to view network activity
- B. Create local filter for bittorrent traffic and then view Traffic logs.
- C. Create a global filter for bittorrent traffic and then view Traffic logs.
- D. Right-Click on the bittorrent link and select Value from the context menu
Answer: A
NEW QUESTION 102
A company has a web server behind a Palo Alto Networks next-generation firewall that it wants to make accessible to the public at 1.1.1.1. The company has decided to configure a destination NAT Policy rule.
Given the following zone information:
* DMZ zone: DMZ-L3
* Public zone: Untrust-L3
* Guest zone: Guest-L3
* Web server zone: Trust-L3
* Public IP address (Untrust-L3): 1.1.1.1
* Private IP address (Trust-L3): 192.168.1.50
What should be configured as the destination zone on the Original Packet tab of NAT Policy rule?
- A. DMZ-L3
- B. Trust-L3
- C. Untrust-L3
- D. Guest-L3
Answer: C
NEW QUESTION 103
Which two options prevent the firewall from capturing traffic passing through it? (Choose two.)
- A. The traffic is offloaded.
- B. The firewall is in multi-vsys mode.
- C. The firewall's DP CPU is higher than 50%.
- D. The traffic does not match the packet capture filter.
Answer: A,D
Explanation:
Reference:
https://www.paloaltonetworks.com/documentation/80/pan-os/pan-os/monitoring/take-packet-captures/disable-hardware- offload
NEW QUESTION 104
An administrator deploys PA-500 NGFWs as an active/passive high availability pair. The devices are not participating in dynamic routing, and preemption is disabled.
What must be verified to upgrade the firewalls to the most recent version of PAN-OS software?
- A. User-ID agent.
- B. Antivirus update package.
- C. WildFire update package.
- D. Applications and Threats update package.
Answer: D
Explanation:
Explanation/Reference: https://www.paloaltonetworks.com/documentation/80/pan-os/newfeaturesguide/upgrade-to-pan-os-
80/upgrade-the-firewall-to-pan-os-80/upgrade-an-ha-firewall-pair-to-pan-os-80
NEW QUESTION 105
Which option is part of the content inspection process?
- A. IPsec tunnel encryption
- B. Packet egress process
- C. Packet forwarding process
- D. SSL Proxy re-encrypt
Answer: D
Explanation:
http://live.paloaltonetworks.com//t5/image/serverpage/image-id/12862i950F549C7D4E6309
NEW QUESTION 106
A variable name must start with which symbol?
- A. $
- B. #
- C. !
- D. &
Answer: A
Explanation:
Explanation
https://docs.paloaltonetworks.com/panorama/8-1/panorama-admin/manage-firewalls/manage-templates-and-temp
NEW QUESTION 107
View the GlobalProtect configuration screen capture.
What is the purpose of this configuration?
- A. It forces the firewall to perform a dynamic DNS update, which adds the internal gateway's hostname and IP address to the DNS server.
- B. It configures the tunnel address of all internal clients to an IP address range starting at 192.168.10.1.
- C. It forces an internal client to connect to an internal gateway at IP address 192.168.10.1.
- D. It enables a client to perform a reverse DNS lookup on 192.168.10.1 to detect that it is an internal client.
Answer: D
Explanation:
Reference:
https://www.paloaltonetworks.com/documentation/80/globalprotect/globalprotect-admin-guide/globalprotect-por the-globalprotect-client-authentication-configurations/define-the-globalprotect-agent-configurations
NEW QUESTION 108
A customer is replacing their legacy remote access VPN solution.
The current solution is in place to secure internet egress and provide access to resources located in the main datacenter for the connected clients.
Prisma Access has been selected to replace the current remote access VPN solution.
During onboarding the following options and licenses were selected and enabled
What must be configured on Prisma Access to provide connectivity to the resources in the datacenter?
- A. Configure Dynamic Routing to provide connectivity to the datacenter
- B. Configure a mobile user gateway in the region closest to the datacenter to enable connectivity to the datacenter
- C. Configure a service connection to provide connectivity to the datacenter
- D. Configure a remote network to provide connectivity to the datacenter
Answer: D
NEW QUESTION 109
Refer to the exhibit.
An administrator cannot see any of the Traffic logs from the Palo Alto Networks NGFW on Panorama. The configuration problem seems to be on the firewall side. Where is the best place on the Palo Alto Networks NGFW to check whether the configuration is correct?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: A
Explanation:
Explanation
https://docs.paloaltonetworks.com/panorama/8-1/panorama-admin/manage-log-collection/configure-log-forward
NEW QUESTION 110
Refer to the exhibit.
An administrator is using DNAT to map two servers to a single public IP address. Traffic will be steered to the specific server based on the application, where Host A (10.1.1.100) receives HTTP traffic and HOST B (10.1.1.101) receives SSH traffic.) Which two security policy rules will accomplish this configuration? (Choose two.)
- A. Untrust (Any) to DMZ (10.1.1.1), web-browsing -Allow
- B. Untrust (Any) to DMZ (10.1.1.100.10.1.1.101), ssh, web-browsing -Allow
- C. Untrust (Any) to DMZ (10.1.1.1), ssh -Allow
- D. Untrust (Any) to Untrust (10.1.1.1), web-browsing -Allow
- E. Untrust (Any) to Untrust (10.1.1.1), ssh -Allow
Answer: A,C
NEW QUESTION 111
Which feature can provide NGFWs with User-ID mapping information?
- A. Native 802.1q authentication
- B. Native 802.1x authentication
- C. GlobalProtect
- D. Web Captcha
Answer: C
Explanation:
Explanation
https://docs.paloaltonetworks.com/pan-os/8-1/pan-os-admin/user-id/user-id-concepts/user-mapping.html
NEW QUESTION 112
Support for which authentication method was added in PAN-OS 8.0?
- A. TACACS+
- B. LDAP
- C. RADIUS
- D. Diameter
Answer: A
Explanation:
Explanation
https://www.paloaltonetworks.com/resources/datasheets/whats-new-in-pan-os-7-1
NEW QUESTION 113
A speed/duplex negotiation mismatch is between the Palo Alto Networks management port and the switch port which it connects. How would an administrator configure the interface to 1Gbps?
- A. set deviceconfig system speed-duplex 1Gbps-duplex
- B. set deviceconfig system speed-duplex 1Gbps-full-duplex
- C. set deviceconfig interface speed-duplex 1Gbps-full-duplex
- D. set deviceconfig Interface speed-duplex 1Gbps-half-duplex
Answer: A
Explanation:
Reference: https://live.paloaltonetworks.com/t5/Configuration-Articles/How-to-Change-the-Speed- and-Duplex-of-the-Management- Port/ta-p/59034
NEW QUESTION 114
Refer to the exhibit.
Which certificates can be used as a Forward Trust certificate?
- A. Certificate from Default Trust Certificate Authorities
- B. Domain-Root-Cert
- C. Forward_Trust
- D. Domain Sub-CA
Answer: A
NEW QUESTION 115
......
Latest PCNSE Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.testsdumps.com/PCNSE_real-exam-dumps.html
PCNSE Updated Exam Dumps [2023] Practice Valid Exam Dumps Question: https://drive.google.com/open?id=1dmoBrlH1vH3L-jcyBqVfX_qMsFtquuf5
