Get Latest [Nov-2021] Conduct effective penetration tests using TestsDumps 500-220
Penetration testers simulate 500-220 exam PDF
Cisco 500-220 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
NEW QUESTION 16
Drag and drop the descriptions from the left onto the corresponding MX operation mode on the right.
Answer:
Explanation:
NEW QUESTION 17
Refer to the exhibit.
Which IDS/IPS mode is the MX Security Appliance configured for?
- A. quarantine
- B. blocking
- C. prevention
- D. detection
Answer: C
NEW QUESTION 18
Refer to the exhibit.
What is the minimal Cisco Meraki Insight licensing requirement?
- A. A single Meraki Insight license must be configured on network B to gain Web App Health visibility on network B.
- B. Two Meraki Insight licenses must be configured on network A to gain Web App Health visibility on network B.
- C. A single Meraki Insight license must be configured on network A to gain Web App Health visibility on network B.
- D. Two Meraki Insight licenses must be configured on network A and a single license must be configured on network B, to gain Web App Health visibility on network B.
- E. A single Meraki Insight license must be configured on network A, and a single license must be configured on network B, to gain Web App Health visibility on network B.
Answer: D
NEW QUESTION 19
Which two features and functions are supported when using an MX appliance in Passthrough mode? (Choose two.)
- A. secondary uplinks
- B. intrusion prevention
- C. DHCP
- D. high availability
- E. site-to-site VPN
Answer: B,E
Explanation:
Reference:
Passthrough_Mode_on_the_MX_Security_Appliance_and_Z-series_Teleworker_Gateway
NEW QUESTION 20
A Cisco Meraki MV camera is monitoring an office and its field of vision currently captures work desks and employee computer screens. However, recording employee computer screens is prohibited by local regulation.
Which feature in Dashboard can be used to preserve the current position of the camera while also meeting regulation requirements?
- A. zone exclusion
- B. privacy window
- C. restricted mode
- D. sensor crop
- E. area or interest
Answer: C
NEW QUESTION 21
Refer to the exhibit.
This Dashboard organization uses Co-Termination licensing model.
What happens when an additional seven APs are claimed on this network without adding licenses?
- A. All network devices stop functioning in 30 days.
- B. One AP Immediately stops functioning.
- C. All APs stop functioning in 30 days.
- D. All APs immediately stop functioning.
Answer: A
NEW QUESTION 22
Which two Systems Manager Live tools are available only for Apple Macs and Windows PCs and cannot be used on iOS or Android mobile devices? (Choose two.)
- A. Remote Desktop
- B. Send notification
- C. Selective wipe
- D. OS updates
- E. Screenshot
Answer: A,C
NEW QUESTION 23
Company iPads are enrolled in Systems Manager without supervision, and profiles are pushed through Systems Manager.
Which outcome occurs when a user attempts to remove the "Meraki Management" profile on an iPad?
- A. The "Meraki Management" profile is removed. All the profiles Systems Manager pushed remain.
- B. The "Meraki Management" profile is removed and then pushed automatically by Systems Manager.
- C. The "Meraki Management" profile cannot be removed.
- D. The "Meraki Management" profile is removed. All the profiles that Systems Manager pushed are also removed.
Answer: D
NEW QUESTION 24
Refer to the exhibit.
What are the Loss and Average Latency statistics based on?
- A. responses that the MX appliance receives on the connectivity-testing IP addresses on the Security & SD- WAN > Firewall page
- B. responses that the MX appliance receives on the connectivity-testing hostnames on the Insight > Web App Health page
- C. responses that the MX appliance receives on the connectivity-testing IP address that is configured on the Security & SD-WAN > SD-WAN & Traffic Shaping page
- D. responses that the MX appliance receives on the connectivity-testing IP addresses on the Help > Firewall info page
Answer: A
NEW QUESTION 25
What is the best practice Systems Manager enrollment method when deploying corporate-owned iOS devices?
- A. manual
- B. Sentry enrollment
- C. Apple Configurator
- D. DEP
Answer: C
NEW QUESTION 26
What occurs when a configuration change is made to an MX network that is bound to a configuration template?
- A. The template configuration overrides the configuration change in the bound network.
- B. The configuration change in the bound network overrides the template configuration.
- C. The configuration change in the bound network is combined with the template configuration inside the template.
- D. The more restrictive configuration is preferred.
Answer: C
Explanation:
Reference:
Managing_Multiple_Networks_with_Configuration_Templates
NEW QUESTION 27
Which information do the MXs in a High Availability pair share?
- A. DHCP association database
- B. time synchronization state
- C. stateful firewall database
- D. spanning-tree state
Answer: D
NEW QUESTION 28
A customer requires a hub-and-spoke Auto VPN deployment with two NAT-mode hubs with dual uplink connections and 50 remote sites with a single uplink connection.
How many tunnels does each hub need to support?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 29
Which order is accurate for a firmware upgrade on MX appliances in a high-availability configuration?
- A. starts on both MX appliances at the same time and then immediately reboots both appliances
- B. starts on the secondary MX appliance and then occurs on the primary MX appliance
- C. starts on both MX appliances at the same time and then reboots both appliances after traffic on the primary MX appliance ceases
- D. starts on the primary MX appliance and then occurs on the secondary MX appliance
Answer: D
NEW QUESTION 30
Refer to the exhibit.
Assuming this MX has established a full tunnel with its VPN peer, how will the MX route the WebEx traffic?
- A. WebEx traffic will prefer WAN 2 as long as it meets the thresholds in the "Conf" performance class.
- B. WebEx traffic will prefer WAN 2 as long as it is up.
- C. WebEx traffic will prefer WAN 1 as it is the primary uplink.
- D. WebEx traffic will be load-balanced between both active WAN links.
Answer: C
NEW QUESTION 31
Refer to the exhibit.
Which design recommendation should be considered?
- A. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
- B. A 50-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
- C. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 1-hop maximum.
- D. A 25-percent throughput loss occurs for every hop. Cisco Meraki best practice recommends a 2-hop maximum.
Answer: C
NEW QUESTION 32
What is the role of the Meraki Dashboard as the service provider when using SAML for single sign-on to the Dashboard?
- A. The Dashboard generates the SAML request.
- B. The Dashboard generates the SAML response.
- C. The Dashboard provides user access credentials.
- D. The Dashboard parses the SAML request and authenticates users.
Answer: A
NEW QUESTION 33
What are two roles of the network and device tags in a Dashboard? (Choose two.)
- A. Network tags can be used to assign networks to separate Auto VPN domains in an Organization with many networks.
- B. Device tags can be assigned to MR APs to influence the gateway selection for repeaters in a mesh wireless network.
- C. Device tags can be used to simplify the assignment of device-level permissions in an Organization with many administrators.
- D. Tags enable administrators to configure a combination of network and device specific tags to create summary reports filtered for specific devices across multiple networks.
- E. Network tags can be used to simplify the assignment of network-level permissions in an Organization with many networks.
Answer: B,D
Explanation:
Reference:
Organization_Menu/Manage_Tags
NEW QUESTION 34
Drag and drop the steps from the left into the sequence on the right to manage device control, according to Cisco Meraki best practice.
Answer:
Explanation:
NEW QUESTION 35
A new application needs to be pushed to all iOS devices. Some devices report "NotNow" in the event log and do not install the application.
What does the "NotNow" event indicate?
- A. The device cannot connect to Cisco Meraki servers.
- B. The application requires the most recent iOS version.
- C. The device cannot connect to Apple servers.
- D. The device is locked with a passcode.
Answer: D
NEW QUESTION 36
Air Marshal has contained a malicious SSID.
What are two effects on connectivity? (Choose two.)
- A. Currently associated clients are affected by restrictive traffic shaping rules.
- B. New clients cannot connect.
- C. Currently associated clients stay connected.
- D. Currently associated clients are disconnected.
- E. New clients can connect.
Answer: B,D
NEW QUESTION 37
What is a feature of distributed Layer 3 roaming?
- A. All wireless client traffic can be split-tunneled.
- B. An MX Security Appliance is not required as a concentrator.
- C. An MX Security Appliance is required as a concentrator.
- D. All wireless client traffic is tunneled.
Answer: B
Explanation:
Reference:
Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MR_Wireless/
Wireless_Layer_3_Roaming_Best_Practices
NEW QUESTION 38
Refer to the exhibit.
For an AP that displays this alert, which network access control method must be in use?
- A. preshared key
- B. WPA2-enterprise with my RADIUS server
- C. splash page with my RADIUS server
- D. MAC-based access control with RADIUS server
Answer: A
NEW QUESTION 39
......
Tested Material Used To 500-220 Test Engine: https://www.testsdumps.com/500-220_real-exam-dumps.html
Steps Necessary To Pass The 500-220 Exam: https://drive.google.com/open?id=1qkl6dz8jfU77SG_vIYnJGLQuBplEbfHG
