Jan-2024 300-410 Study Material, Preparation Guide and PDF Download
Free 300-410 Certification Sample Questions with Online Practice Test
Earning the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification can be a valuable addition to an IT professional's resume, as it demonstrates their expertise in advanced routing technologies and services. In addition to validating their skills and knowledge, this certification can also help professionals advance their careers and pursue new opportunities in enterprise networking and infrastructure implementation.
Exam Benefits
After you pass the Cisco 300-410, you will get the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certificate. Moreover, you will also satisfy the concentration requirement for the CCNP Enterprise validation. To obtain the second option, you also need to pass the core exam first (the Cisco 350-401). It’s to be mentioned that the CCNP Enterprise is a very important certification that you can’t miss if you want to become a professional in the networking field. This qualification helps you prove your knowledge and skills in the enterprise network technologies landscape and stay relevant. In addition, it covers core technologies as well as an enterprise focus area of the candidate’s choice. If you want, you can always go further and aim for the expert-level option afterward.
NEW QUESTION # 278
Drag and drop the OSPF adjacency states from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 279
An engineer is implementing a coordinated change with a server team. As part of the change, the engineer must configure interlace GigabitEthernet2 in an existing VRF "RED" then move the interface to an existing VRF "BLUE" when the server team is ready. The engineer configured interface GigabitEthemet2 in VRF
"RED"
Which configuration completes the change?
- A. interface GigabitEthernet2
no vrf forwarding RED
vrf forwarding BLUE - B. interface GigabitEthernet2
no vrf forwarding RED
vrf forwarding BLUE
ip address 10.0.0.0 255.255.255.254 - C. interface GigabitEthernet2
no ip address
ip address 10.0.0.0 255.255.255.254
vrf forwarding BLUE - D. interface GigabitEthernet2
no ip address
vrf forwarding BLUE
Answer: B
Explanation:
Explanation
When assigning an interface to a VRF, the IP address will be removed so we have to reassign the IP address to that interface.
NEW QUESTION # 280
Refer to Exhibit.
Traffic from the branch network should route through HQ R1 unless the path is unavailable. An engineer tests this functionality by shutting down interface on the BRANCH router toward HQ_R1 router but
192.168.20.0/24 is no longer reachable from the branch router. Which set of configurations resolves the issue?
- A. HQ_R1(config)# ip sla responder
HQ_R1(config)# ip sla responder icmp-echo 172.16.35.2 - B. BRANCH(config)# ip sla 1
BRANCH(config-ip-sla)# icmp-echo 172.16.35.2 - C. HQ_R2(config)# ip sla responder
HQ_R2(config)# ip sla responder icmp-echo 172.16.35.5 - D. BRANCH(config)# ip sla 1
BRANCH(config-ip-sla)# icmp-echo 172.16.35.1
Answer: B
Explanation:
Explanation
In the configuration above, the engineer has made a mistake as he was tracking 172.16.35.6 (the backup path) instead of tracking the main path (172.16.35.2). Therefore,when he shut down the main path, the track 1 was still up so traffic still went through the main path -> it failed.
To fix this issue, we just need to correct the tracking interface of the main path.
NEW QUESTION # 281
Refer to the exhibit.
An engineer must configure a LAN-to-LAN IPsec VPN between R1 and the remote router. Which IPsec Phase 1 configuration must the engineer use for the local router?
- A. crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123 address 200.1.1.3 - B. crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123 address 199.1.1.1 - C. crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
!
crypto isakmp key cisco123 address 200.1.1.3 - D. crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123! address 199.1.1.1
Answer: C
Explanation:
In the "crypto isakmp key ... address " command, the address must be of the IP address of the other end (which is 200.1.1.3 in this case) so Option A and Option B are correct. The difference between these two options are in the hash SHA or MD5 method but both of them can be used although SHA is better than MD5 so we choose Option A the best answer.
Note: Cisco no longer recommends using 3DES, MD5 and DH groups 1, 2 and 5.
Reference:
5/sec-ipsec-management-xe-16-5-book/sec-ipsec-usability-enhance.html
NEW QUESTION # 282
Drag and drop the actions from the left into the correct order on the right to configure a policy to avoid following packet forwarding based on the normal routing path.
Answer:
Explanation:
Explanation
https://community.cisco.com/t5/networking-documents/how-to-configure-pbr/ta-p/3122774
NEW QUESTION # 283
Refer to the exhibit.
The output of the trace route from R5 shows a loop in the network. Which configuration prevents this loop?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: C
NEW QUESTION # 284
Refer to the exhibit.
After redistribution is enabled between the routing protocols; PC2, PC3, and PC4 cannot reach PC1. Which action can the engineer take to solve the issue so that all the PCs are reachable?
- A. Filter the prefix 10.1.1.0/24 when redistributed from RIP to EIGRP.
- B. Filter the prefix 10.1.1.0/24 when redistributed from OSPF to EIGRP.
- C. Set the administrative distance 100 under the RIP process on R2.
- D. Redistribute the directly connected interfaces on R2.
Answer: B
NEW QUESTION # 285
Drag and drop the ICMPv6 neighbor discovery messages from the left onto the correct packet types on the right.
Answer:
Explanation:
NEW QUESTION # 286
Refer to the exhibit.
Refer to the exhibit. An engineer configured route exchange between two different companies for a migration project EIGRP routes were learned in router C but no OSPF routes were learned in router A.
Which configuration allows router A to receive OSPF routes?
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: C
NEW QUESTION # 287
Refer to the exhibit.
Refer to the exhibit. A network administrator configured mutual redistribution on R1 and R2 routers, which caused instability in the network. Which action resolves the issue?
- A. Set a tag in the route map when redistributing EIGRP into OSPF on R1. and match the same tag on R2 to allow when redistributing OSPF into EIGRP.
- B. Apply a prefix list of EIGRP network routes in OSPF domain on R1 to propagate back into the EIGRP routing domain.
- C. Advertise summary routes of EIGRP to OSPF and deny specific EIGRP routes when redistributing into OSPF.
- D. Set a tag in the route map when redistributing EIGRP into OSPF on R1. and match the same tag on R2 to deny when redistributing OSPF into EIGRP.
Answer: D
Explanation:
When doing mutual redistribution at multiple points (between OSPF and EIGRP on R1 & R2), we may create routing loops so we should use route-map to prevent redistributed routes from redistributing again into the original domain.
In the below example, the route-map "SET-TAG" is used to prevent any routes that have been redistributed into EIGRP from redistributed again into OSPF domain by tagging these routes with tag 1:
NEW QUESTION # 288
When provisioning a device in Cisco DNA Center, the engineer sees the error message "Cannot select the device. Not compatible with template".
What is the reason for the error?
- A. The changes to the template were not committed.
- B. The template has an incorrect configuration.
- C. The tag that was used to filter the templates does not match the device tag.
- D. The software version of the template is different from the software version of the device.
Answer: D
NEW QUESTION # 289
Refer to the exhibit.
Refer to the exhibit. An administrator must upload the packages conf Me to an FTP server. However, the FTP server rejected anonymous service and required users to authenticate What are the two ways to resolve the issue? (Choose two.)
- A. Enter the FTP server credentials directly In the FTP URL using the ftp://username:passwordQ192.0.2.40/ syntax .
- B. Use the copy flash:packages.conf scp: command instead and enter the FTP server credentials when prompted.
- C. Use is ftp username and ip ftp password configuration commands to specify valid FTP server credentials.
- D. Create a user on the rooter matching the username and password on the FTP server and log in before attempting the copy
- E. Use the copy flash-packages conf ftp: command instead and enter the FTP server credent-ais when prompted.
Answer: A,C
NEW QUESTION # 290
Exhibit:
BGP is flapping after the Copp policy is applied. What are the two solutions to fix the issue?
(Choose two)
- A. Configure IP CEF to CoPP policy and BGP to work
- B. Configure a three-color policer instead of two-color policer under class COPP-CRITICAL-
7600 - C. Configure a higher value for CIR under the default class to allow more packets during peak traffic
- D. Configure a higher value for CIR under the class COPP-CRITICAL-7600
- E. Configure BGP in the COPP-CRITICAL-7600 ACL
Answer: C,E
Explanation:
The policy-map COPP-7600 only rate-limit HTTP & HTTPS traffic (based on the ACL conditions) so any BGP packets will be processed in the class "class-default", which drops exceeded BGP packets. Therefore we have two ways to solve this problem:
+ Add BGP to the ACL with the statement "permit tcp any any eq bgp"
+ Configure higher value for CIR in default class as 2Mbps is too low for web traffic (http &
https)
NEW QUESTION # 291
Which configuration adds an IPv4 interface to an OSPFv3 process in OSPFv3 address family configuration?
- A. router ospfv3 1
address-family ipv4 - B. Router(config-if)#ospfv3 1 ipv4 area 0
- C. Router(config-router)#ospfv3 1 ipv4 area 0
- D. router ospfv3 1
address-family ipv4 unicast
Answer: D
Explanation:
Section: Layer 3 Technologies
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-3s/iro-xe-3s-book/ ip6-route-ospfv3-add-fam-xe.html
NEW QUESTION # 292
An engineer notices that R1 does not hold enough log messages to Identity the root cause during troubleshooting Which command resolves this issue?
- A. (config)#logging buffered 16000 informational
- B. (config)#logging buffered 4096 informational
- C. #logging buffered 4096 critical
- D. #logging buffered 16000 critical
Answer: A
NEW QUESTION # 293
......
Cisco 300-410 (Implementing Cisco Enterprise Advanced Routing and Services) Certification Exam is a professional-level certification that is designed to validate the skills and knowledge of network engineers who are responsible for implementing advanced routing and services in enterprise networks. 300-410 exam is ideal for network professionals who have a good understanding of network protocols, routing, and switching technologies, and are looking to enhance their skills in advanced routing and services.
300-410 Certification Study Guide Pass 300-410 Fast: https://www.testsdumps.com/300-410_real-exam-dumps.html
300-410 Dumps PDF 2024 Program Your Preparation EXAM SUCCESS: https://drive.google.com/open?id=1gT1BUflvX5nQr_EhN9uS3-pGDd9lw-aE
