New (2022) Network Appliance NS0-526 Exam Dumps
Best Way To Study For Network Appliance NS0-526 Exam Brilliant NS0-526 Exam Questions PDF
NEW QUESTION 31
You have a SnapMirror relationship established between two sites and want to verify that the data on the DR site is usable without disturbing the source.
In this scenario, which three steps are required to accomplish this task? (Choose three.)
- A. Resynchronize the destination to the source volume, then update the source volume.
- B. Quiesce the SnapMirror destination, then break the SnapMirror destination.
- C. Resume the SnapMirror destination, then update the SnapMirror destination.
- D. Reverse the SnapMirror source and destination, then re-initialize SnapMirror.
- E. Configure the destination volume for data access, then access the data volume from a client.
Answer: A,B,D
NEW QUESTION 32
You recently set up a SnapMirror relationship with a daily update schedule. You want to verify that the updates are being performed daily.
Which two actions inside OnCommand System Manager would you ensure that the SnapMirror transfers are occurring daily? (Choose two.)
- A. In the Relationships window, verify that the lag time is less than 24 hours.
- B. In the Jobs window, verify that all SnapMirror jobs have completed within the past 24 hours.
- C. In the Jobs window, verify that all manual Snapshot copy operations have completed in the past 24 hours.
- D. In the Relationships window, verify that the relationship state was broken in the past 24 hours.
Answer: A,B
NEW QUESTION 33
Click the Exhibit button.
You have a volume that was configured a year ago using the default Snapshot policy that is shown in the exhibit. You need to increase the number of hourly maximum Snapshot copies to retain only four copies.
Which additional action is needed to keep only four hourly Snapshot copies in this volume after modifying the schedule?
- A. Modify the volume guarantee
- B. Modify the Snapshot reserve.
- C. Reapply the default policy to the volume
- D. Delete two hourly Snapshotcopies
Answer: D
NEW QUESTION 34
You are installing a MetroCluster for clustered Data ONTAP consisting of FAS8080s. How are the high-availability interconnects cabled?
- A. High-availability interconnects are cabled both locally and remotely between thenodes.
- B. Each high-availability pair controller is cabled to its local partner.
- C. High-availability interconnects between the nodes are not needed.
- D. High-availability interconnects are only needed for the remote connections between the nodes.
Answer: A
NEW QUESTION 35
When volumes are set to be thin-provisioned, what must be monitored for space usage?
- A. volume clone space
- B. aggregate
- C. Snapshot reserve
- D. LUN
Answer: B
NEW QUESTION 36
You are working for a customer that has deployed a large FlexGroup with ONTAP 9.5. This FlexGroup has a SnapMirror relationship to a system at a disaster recovery site. The FlexGroup is nearly full and needs to be expanded to accommodate additional data.
In this scenario, what must you do to expand the FlexGroup and ensure that the data remains protected?
- A. Offline the source FlexGroup, add additional volumes, bring it online, and update the SnapMirror.
- B. Break the SnapMirror relationship, expand the source FlexGroup, and re-baseline the SnapMirror.
- C. Expand the source FlexGroup nondisruptively, and update the SnapMirror.
- D. Break the SnapMirror relationship, expand the source FlexGroup, and update the SnapMirror.
Answer: A
NEW QUESTION 37
You want to back up a critical Oracle database that resides on a LUN on the NetApp storage system. You decide that a Snapshot copy is the most efficient way to back up thedatabase. You cannot afford to create any down time for the database.
What must you do to ensure that the data in the database is consistent when you create the Snapshot copy?
- A. Have the database administrator issue a checkpoint to the database then use SnapDrive for Unix to take the Snapshot copy of the database LUN.
- B. Use SnapDrive for Unix to take the Snapshot copy of the database LUN.
- C. Disable SnapDrive for Unix then run the backup from SnapManager for Oracle.
- D. Use SnapManager for Oracle to take the Snapshot copy backup.
Answer: B
NEW QUESTION 38
A company just installed SnapCenter to help manage their ONTAP 9.7 environment. The database administrator wants to add new volumes with LUNs for a 10 TB Oracle database.
Which two tools would accomplish this task? (Choose two.)
- A. Active IQ Unified Manager
- B. SnapCenter Plug-in for Oracle Database
- C. OnCommand Insight
- D. ONTAP System Manager
Answer: B,C
NEW QUESTION 39
You have a SnapVault backup from your primary site to your secondary site with a LUN in the volume.
In this scenario, what is transferred?
- A. LUN mapping status
- B. UUID
- C. serial number
- D. selected Snapshot copies
Answer: D
NEW QUESTION 40
Which two configurations would be used to protect volumes in a production ONTAP system at two different disaster recovery (DR) locations? (Choose two.)
- A. SVM DR in a cascade topology
- B. SVM DR in a fan-out topology
- C. SnapMirror in a fan-out topology
- D. SnapMirror in a cascade topology
Answer: A,C
NEW QUESTION 41
Click the Exhibit button.
A customer is interested in using SnapCenter to support Snapshot copies with their Oracle DB. They virtualized their environment but do not have any block protocols available.
In this solution, which protocol shown in the exhibit is supported?
- A. FC
- B. NFS
- C. SMB3
- D. iSCSI
Answer: B
NEW QUESTION 42
Your customer wants to implement SVM DR, but the customer is not certain whether the identity-preserve parameter should be enabled. The customer explains that the source and destination clusters are in different network subnets.
In this scenario, which SVM DR solution should the customer use?
- A. SVM DR with the identity-preserve parameter enabled and the default SnapMirror policy.
- B. SVM DR using the identity-preserve parameter disabled and the default SnapMirror policy.
- C. SVM DR using the identity-preserve parameter enabled and then administratively take the data LIFs offline on the DR cluster.
- D. SVM DR with the identity-preserve parameter enabled and a SnapMirror policy with the discard-configs network parameter.
Answer: A
NEW QUESTION 43
You have set up a SnapMirror relationship between two SVMs for data protection. The data in the source volume is unavailable due to an event related to a virus infection leading to data corruption.
In this scenario, which three actions are required to activate the SnapMirror destination volume and provide data access to the users? (Choose three.)
- A. Perform a SnapMirror quiesce operation.
- B. Disable the source volume by taking it offline.
- C. Configure the destination volume for data access.
- D. Perform a SnapMirror break operation.
- E. Verify the status of the source and destination volumes.
Answer: C,D,E
NEW QUESTION 44
Click the Exhibit button.
Your customer wants to protect a volume and replicate it to a secondary volume. The customer has tried to configure this relationship using OnCommand System Manager. Upon reviewing this newly configured relationship, you discover that the configuration does not satisfy the customer's stated requirements.
Referring to the exhibit, what should you do to ensure that the volume is protected?
- A. Delete the relationship and recreate it.
- B. Initialize the relationship.
- C. Resynchronize the relationship.
- D. Change the schedule to hourly.
Answer: A
NEW QUESTION 45
A customer is using SnapMirror to replicate their data to a remote site. They notice that storage efficiency is nor preserved, and the amount of data at the destination is higher than expected.
In this scenario, which configuration in the destination volume would cause this issue?
- A. Post process compression is enabled on the destination.
- B. There is an existing FlexClone volume on the destination.
- C. Post process deduplication is enabled on the destination.
- D. The volumes are not thin-provisioned on the destination.
Answer: B
NEW QUESTION 46
You are configuring a SnapMirror replication between a source volume with adaptive compression enabled and a destination volume with secondary compression enabled.
In this scenario; which statement is correct?
- A. Logical replication with storage efficiency is used.
- B. Data is recompressed using the source volume's compression type.
- C. Blocks are uncompressed at the source and transferred to the destination.
- D. Storage efficiency (compressed and deduplicated blocks) is preserved during data transfer.
Answer: D
NEW QUESTION 47
Click the Exhibit button.
You want to restore a file from the engineering volume that is shown in the exhibit. When you click Restore in OnCommand Unified Manager, there are no files available to restore.
Referring to the exhibit, what caused this problem?
- A. Workflow Automation is not configured to restore files from Snapshot copies.
- B. The engineering volume is currently online.
- C. The engineering volume is unprotected.
- D. No Snapshot copies exist for the engineering volume.
Answer: A
NEW QUESTION 48
You configured a SnapMirror relationship with a default policy for the daily mirroring of a volume which contains financial dat a. Although the data is critical, it only changes on a monthly basis.
Using On Command System Manager, whichtwo actions would change the frequency of the SnapMirror updates?
(Choose two.)
- A. Edit the parameters of the default policy.
- B. Select or create a different policy.
- C. Edit the parameters of the default schedule.
- D. Select or create a different schedule.
Answer: A,B
NEW QUESTION 49
Click the Exhibit button on the right.
Referring to the exhibit, which two tiers are monitored in the volume capacity? (Choose two)
- A. licensed
- B. metadata
- C. performance
- D. capacity
Answer: C,D
NEW QUESTION 50
Click the Exhibit button.
Referring to the exhibit, what must be performed on nodes aff-01 and aff-02 to allow them to failover and giveback properly?
- A. Move the LIFs to their home ports.
- B. Disconnect the HA connection between the nodes.
- C. No additional action is necessary.
- D. Reboot aff-02 to resolve the LIF issue.
Answer: A
NEW QUESTION 51
You are asked to implement a NetApp solution that has high availability with transparent failover between two data centers.
Which two solutions satisfy this requirement? (Choose two.)
- A. SnapVault
- B. ONTAP Select
- C. SnapMirror Sync
- D. MetroCluster
Answer: A,D
NEW QUESTION 52
A customer is planning the cloud strategy for their Microsoft SQL databases and must be able to protect them from outages. They are planning on using multiple cloud providers for their solution with their current NetApp storage system.
In this scenario, which two products are required to satisfy their backup management needs? (Choose two.)
- A. SnapCenter
- B. Cloud Volumes ONTAP
- C. CloudSync
- D. FlashPool
Answer: A,B
NEW QUESTION 53
......
NetApp NS0-526 Exam Certification Details:
| Exam Name | Implementation Engineer Data Protection Specialist |
| Exam Registration | PEARSON VUE |
| Recommended Training | ONTAP Data Protection Administration (ILT) ONTAP MetroCluster Installation (ILT) ONTAP Data Protection Fundamentals (WBT) |
| Sample Questions | NetApp NS0-526 Sample Questions |
| Duration | 90 minutes |
| Number of Questions | 60 |
| Passing Score | 65% |
| Exam Price | $150 USD |
Updated Verified Pass NS0-526 Exam - Real Questions & Answers: https://www.testsdumps.com/NS0-526_real-exam-dumps.html
