Prepare for the Actual CCNP Enterprise 350-401 Exam Practice Materials Collection
CCNP Enterprise Certified Official Practice Test 350-401 - Dec-2023
NEW QUESTION # 360
An administrator must enable Telnet access to Router X using the router username and password database for authentication. Which configuration should be applied?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: D
NEW QUESTION # 361 
Answer:
Explanation:
NEW QUESTION # 362
Which statement describes the IP and MAC allocation requirements for virtual machines on types 1 hypervisors?
- A. Each virtual machine requires a unique MAC address but shares the IP address with the physical server.
- B. Each virtual machines requires a unique IP address but shares the MAC address with the address of the physical server.
- C. Each virtual machine requires a unique IP address but shares the MAC address with the physical server
- D. Each virtual machine requires a unique IP and MAC addresses to be able to reach to other nodes.
Answer: D
Explanation:
A virtual machine (VM) is a software emulation of a physical server with an operating system.
From an application's point of view, the VM provides the look
and feel of a real physical server, including all its components, such as CPU, memory, and network
interface cards (NICs).
The virtualization software that creates VMs and performs the hardware abstraction that allows
multiple VMs to run concurrently is known as a hypervisor.
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical
server. Then instances of an operating system (OS) are installed on the hypervisor. Type 1
hypervisor has direct access to the hardware resources. Therefore they are more efficient than
hosted architectures. Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM
Server, KVM and Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an
operating system and not the physical hardware directly. answer 'Each virtual machine requires a
unique IP and MAC addresses to be able to reach to other nodes' big advantage of Type 2
hypervisors is that management console software is not required. Examples of type 2 hypervisor
are VMware Workstation (which can run on Windows, Mac and Linux) or Microsoft Virtual PC (only
runs on Windows).
NEW QUESTION # 363
Which statement about route targets is true when using VRF-Lite?
- A. Route targets allow customers to be assigned overlapping addresses.
- B. When BGP is configured, route targets are transmitted as BGP standard communities.
- C. Route targets uniquely identify the customer routing table.
- D. Route targets control the import and export of routes into a customer routing table.
Answer: D
Explanation:
Explanation
Answer 'Route targets allow customers to be assigned overlapping addresses' and answer 'Route targets uniquely identify the customer routing table' are not correct as only route distinguisher (RD) identifies the customer routing table and "allows customers to be assigned overlapping addresses".
Answer 'When BGP is configured, route targets are transmitted as BGP standard communities' is not correct as "When BGP is configured, route targets are transmitted as BGP extended communities"
NEW QUESTION # 364
Refer to the exhibit. External users require HTTP connectivity to an internal company web server that is listening on TCP port 8080. Which command set accomplishes this requirement?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 365
Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 366
Drag and drop the characteristics from the left onto the routing protocols they describe on the right.
Answer:
Explanation:
Explanation
A picture containing timeline Description automatically generated
NEW QUESTION # 367
Drag and drop the DHCP messages that are exchanged between a client and an AP into the order they are exchanged on the right.
Answer:
Explanation:
NEW QUESTION # 368
Refer to the exhibit.
Which IPv6 OSPF network type is applied to interface Fa0/0 of R2
by default?
- A. point-to-point
- B. Ethernet
- C. broadcast
- D. multipoint
Answer: C
Explanation:
Explanation
The Broadcast network type is the default for an OSPF enabled ethernet interface (while Point-to- Point is the default OSPF network type for Serial interface with HDLC and PPP encapsulation).
NEW QUESTION # 369
Drag and drop the characteristics from the left onto the switching architectures on the right.
Answer:
Explanation:
.
NEW QUESTION # 370
Refer to the exhibit.
An engineer must modify the access control list EGRESS to allow all IP traffic from subnet 10.1.10.0/24 to
10.1.2.0/24. The access control list is applied in the outbound direction on router interface GigabitEthemet 0/1.
Which configuration commands can the engineer use to allow this traffic without disrupting existing traffic flows?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: D
NEW QUESTION # 371
Which algorithms are used to secure REST API from brute attacks and minimize the impact?
- A. SHA-1, SHA-256, and SHA-512
- B. SHA-512 and SHA-384
- C. MD5 algorithm-128 and SHA-384
- D. PBKDF2, BCrypt, and SCrypt
Answer: D
Explanation:
Explanation
One of the best practices to secure REST APIs is using password hash. Passwords must always be hashed to protect the system (or minimize the damage) even if it is compromised in some hacking attempts. There are many such hashing algorithms which can prove really effective for password security e.g. PBKDF2, bcrypt and scrypt algorithms.
Other ways to secure REST APIs are: Always use HTTPS, Never expose information on URLs (Usernames, passwords, session tokens, and API keys should not appear in the URL), Adding Timestamp in Request, Using OAuth, Input Parameter Validation.
NEW QUESTION # 372
Reter to the exhibit.
Refer to the exhibit. An engineer must configure an eBGP neighborship to Router B on Router A.
The network that is connected to GO/1 on Router A must be advertised to Router B.
Which configuration should be applied?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 373 
Refer to the exhibit. An engineer configures monitoring on SW1 and enters the show command to verify operation. What does the output confirm?
- A. RSPAN session 1 is incompletely configures for monitoring.
- B. RSPAN session 1 monitors activity on VLAN 50 of a remote switch.
- C. SPAN session 2 monitors all traffic entering and exiting port FastEthernet 0/15.
- D. SPAN session 2 only monitors egress traffic exiting port FastEthernet 0/14.
Answer: A
NEW QUESTION # 374
Which option must be used to support a WLC with an IPv6 management address and 100 Cisco Aironet 2800 Series access points that will use DHCP to register?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 375
Which feature Is used to propagate ARP broadcast, and link-local frames across a Cisco SD-Access fabric to address connectivity needs for silent hosts that require reception of traffic to start communicating?
- A. Layer 2 Flooding
- B. Multisite Fabric
- C. Native Fabric Multicast
- D. SOA Transit
Answer: A
Explanation:
Layer2 Flooding
Cisco SD-Access fabric provides many optimizations to improve unicast traffic flow, and to reduce the unnecessary flooding of data such as broadcasts. But, for some traffic and applications, it may be desirable to enable broadcast forwarding within the fabric.
By default, this is disabled in the Cisco SD-Access architecture. If broadcast, Link local multicast and Arp flooding is required, it must be specifically enabled on a per-subnet basis using Layer 2 flooding feature.
Layer 2 flooding can be used to forward broadcasts for certain traffic and application types which may require leveraging of Layer 2 connectivity, such as silent hosts, card readers, door locks, etc.
NEW QUESTION # 376
Drag and drop the snippets onto the blanks within the code to construct a script that configures BGP according to the topology. Not all options are used, and some options may be used twice.
Answer:
Explanation:
NEW QUESTION # 377
Refer to exhibit.
VLANs 50 and 60 exist on the trunk links between all switches All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server Which command ensures that SW3 receives frames only from VLAN
50?
- A. SW2(config)#vtp pruning
- B. SW3(config)#vtp mode transparent
- C. SW1 (config)#vtp mode transparent
- D. SW1 (config)#vtp pruning
Answer: D
Explanation:
Explanation
SW3 does not have VLAN 60 so it should not receive traffic for this VLAN (sent from SW2).
Therefore we should configure VTP Pruning on SW3 so that SW2 does not forward VLAN 60 traffic to SW3. Also notice that we need to configure pruning on SW1 (the VTP Server), not SW2.
NEW QUESTION # 378
Which router is elected the IGMP Querier when more than one router is in the same LAN segment?
- A. The router with the lowest IP address
- B. The router with the shortest uptime
- C. The router with the longest uptime
- D. The router with the highest IP address
Answer: A
NEW QUESTION # 379
......
Passing the 350-401 ENCOR exam is a significant achievement that opens up numerous career opportunities for IT professionals. Cisco is a reputable company that is known for providing high-quality training and certification programs that are recognized worldwide. Therefore, obtaining the Cisco 350-401 certification demonstrates to employers that one has the skills and knowledge required to implement and manage complex enterprise network solutions.
Ace Cisco 350-401 Certification with Actual Questions Dec 18, 2023 Updated: https://www.testsdumps.com/350-401_real-exam-dumps.html
2023 The Most Effective 350-401 with 775 Questions Answers: https://drive.google.com/open?id=1vAg3V3TERzDqw_cV44_UaRNgMEb1BIN2
