[Jan-2024] Pass EMC DES-4122 Exam in First Attempt Guaranteed!
Full DES-4122 Practice Test and 62 unique questions with explanations waiting just for you, get it now!
NEW QUESTION # 11
How can a technician know whether IDRAC9 System Lockdown mode is enabled?
- A. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots
- B. Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots
- C. Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots
- D. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots
Answer: B
NEW QUESTION # 12
A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system. What Is the cause of this Issue?
Note: It is necessary to dose (x) the simulator window before you can select a response to this question.
- A. There are more than the maximum number of active sessions
- B. Operating system not installed on remote server
- C. The Virtual Console is disabled
- D. The server has been powered down
Answer: D
NEW QUESTION # 13
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?
- A. Includes onsite monitoring and automated collection of system state information
- B. Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices
- C. Dispatches technical support from Dell for all Dell servers, storage, and networking devices
- D. Proactive, predictive, and automated support technology to enable faster resolution and reporting
Answer: A
NEW QUESTION # 14
You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives Which PERC model best supports this configuration?
- A. H740T
- B. H740P
- C. S140
- D. H330
Answer: C
NEW QUESTION # 15
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?
- A. Enable the Match Firmware of Replaced Part setting in the system BIOS
- B. Enable the Collect System Inventory On Restart (CSIOR) attribute
- C. Configure servers to access the remote firmware repository
- D. Install and configure a repository manager
Answer: C
NEW QUESTION # 16
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?
- A. Configure servers to access the remote firmware repository
- B. Enable the Collect System Inventory On Restart (CSIOR) attribute
- C. Install and configure a repository manager
- D. Enable the Match Firmware of Replaced Part setting in the system BIOS
Answer: D
NEW QUESTION # 17
When does a customer require the Service Tag of the Dell EMC PowerEdge server?
- A. First time logging in to iDRAC
- B. First time accessing the BIOS
- C. Activating the OS
- D. Obtaining warranty information
Answer: A
NEW QUESTION # 18
Dell EMC PowerEdge 14G servers support which technology?
- A. iDRAC8
- B. Intel Boot Guard
- C. Quicksync 1.0
- D. AMD GuardMI
Answer: D
NEW QUESTION # 19
What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?
- A. OpenManage Essentials
- B. SupportAssist Enterprise
- C. iSM
- D. iDRAC9
Answer: A
NEW QUESTION # 20
Which mobile devices are supported by Quick Sync 2.0 in 14G PowerEdge servers?
- A. iOS and Android devices only
- B. iOS devices only
- C. iOS, Android, and Windows Phone devices
- D. Android devices only
Answer: A
NEW QUESTION # 21
An engineer needs to install an additional PSU on an existing, single PSU Dell EMC PowerEdge R740. They complete the initial installation and cabling procedures. They connect an AC cable and the power distribution unit produces normal AC output. The engineer checks power management and sees that the new PSU is in the Failed state.
What task should be completed to troubleshoot this issue?
- A. Set the PSU AC redundancy to 1+0
- B. Confirm the System Input Power CAP is not set to Low
- C. Set the PSU AC redundancy to 1+1
- D. Verify the new PSU is the same type and wattage rating
Answer: D
NEW QUESTION # 22
A technician installs eight servers into a fully operational rack with top of rack switch Each server has a quad 1Gb NIC and redundant power supplies The company uses iDRAC in shared LOM mode with LOM1 as the selected NIC What should the technician do to verify iDRAC connectivity on each server?
- A. iDRAC Enterprise license is installed
- B. iDRAC dedicated NIC port is cabled and the link light is green
- C. iDRAC Datacenter license is installed.
- D. Ethernet port LOM1 is cabled and the link light is green.
Answer: D
NEW QUESTION # 23
What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?
- A. All GPU cards must be of the same type but can be a different model
- B. All GPU cards must be installed on the same riser card.
- C. All GPU cards must be of the same type and model
- D. All GPU cards must be installed at the same time
Answer: C
NEW QUESTION # 24
A technician working with a Dell EMC PowerEdge 1 take corrective action?
- A. Check the LCC Log
Check PSU LED
Reseat the PSU - B. Check the LCC Log
Check PSU LED
Reseat the CPU - C. Check the System Event Log
Check PSU LED
Reseat the PSU - D. Check the System Event Log
Check PSU LED
Do a virtual reseat of the iDRAC
Answer: D
NEW QUESTION # 25
What is the minimum number of components, beside the system board, required to POST?
- A. 1 PSU, 1 DIMM, and 1 CPU only
- B. 1 PSU, 1 CPU, 1 DIMM, and PERC SAS controller
- C. PSUs, CPUs, and DIMMs as configured in BIOS
- D. 1 PSU and 1 CPU only
Answer: A
NEW QUESTION # 26
What is a key distinction between 1DRAC8 and 1DRAC9?
- A. iDRAC9 offers HTML5 based GUI
- B. iDRAC9 default credentials are root/calvin orderable only
- C. iDRAC8 offers HTML5 based GUI
- D. iDRAC8 default credentials are customer orderable
Answer: D
NEW QUESTION # 27
......
Prepare for your EMC certification with the updated TestsDumps DES-4122 exam questions: https://drive.google.com/open?id=1FeX8eDkauKO1EN3KYxwIA-yDeXq3nwpY
Get Latest DES-4122 Dumps Exam Questions in here: https://www.testsdumps.com/DES-4122_real-exam-dumps.html
