Real 2V0-41.20 Exam PDF Test Engine Practice Test Questions [Q27-Q47]

Share

Real 2V0-41.20 Exam PDF Test Engine Practice Test Questions

VMware 2V0-41.20 Real 2022 Braindumps Mock Exam Dumps


Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam

Installing, configuring, handling, and troubleshooting NSX-T Data Center 3.0 solutions should be 6 months or more of experience for the minimally eligible applicant. Candidates who are well aware of NSX-T characteristics, functions, and architectures should take this exam. People with at least 6 months of Linux and KVM hands-on experience are highly encouraged to apply for this certification as this will give them an edge. In IT and with VMware vSphere and its command line, they should have 1 year of experience operating. Additional industry-recognized IT certifications or accreditation would likely be held by the successful applicant. All the information found in the exam sections mentioned below should be in the MQC.


For more info read reference:

Exam Guide FAQs and Guide

 

NEW QUESTION 27
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

  • A. virsh get-interface <VM Name>
  • B. virsh show <VM Name> | grep interfaceid
  • C. virsh dumpxml <VM Name> | grep interfaceid
  • D. virsh list-interface <VM Name>

Answer: C

 

NEW QUESTION 28
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

  • A. virsh get-interface <VM Name>
  • B. virsh show <VM Name> | grep interfaceid
  • C. virsh dumpxml <VM Name> | grep interfaceid
  • D. virsh list-interface <VM Name>

Answer: C

Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

 

NEW QUESTION 29
What are two supported N-VDS modes? (Choose two.)

  • A. Enhanced Datapath
  • B. Secure Datapath
  • C. Overlay Datapath
  • D. Standard Datapath
  • E. DPDK Datapath

Answer: A,D

Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-37BC3CEF-DCC1-4C6F-960D-CFBB31908D1C.html

 

NEW QUESTION 30
Refer to the exhibit.

Which NAT type must the NSX-T Data Center administrator create on the Tier-0 or Tier-1 Gateway to allow Web VM to initiate communication with public networks?

  • A. 1:1 NAT
  • B. DNAT
  • C. SNAT
  • D. Reverse NAT

Answer: C

 

NEW QUESTION 31
Where are Distributed Firewall logs containing access decisions stored?

  • A. NSX API
  • B. Hypervisor transport node
  • C. NSX Manager
  • D. NSX Edge

Answer: B

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A

 

NEW QUESTION 32
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)

  • A. SSL
  • B. UDP
  • C. SSH
  • D. TCP
  • E. HTTPS
  • F. TLS

Answer: B,D,F

 

NEW QUESTION 33
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:

Which two commands must be executed to check BGP neighbor status? (Choose two.)

  • A. sa-nsxedge-01(tier0_sr)> get bgp neighbor
  • B. sa-nsxedge-01(tier0_dr)> get bgp neighbor
  • C. sa-nsxedge-01(tier1_sr)> get bgp neighbor
  • D. vrf 1
  • E. vrf 3
  • F. vrf 4

Answer: A,E

 

NEW QUESTION 34
Which to steps must an NSX administrator take to integrate VMware Identity Manager in NSX-T to support role-based access control? (Choose two.)

  • A. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.
  • B. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
  • C. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
  • D. Create an OAuth 2.0 client in VMware Identity Manager.
  • E. Enter the Identity Provider (IdP) metadata URL in NSX Manager.

Answer: C,D

 

NEW QUESTION 35
Where are Distributed Firewall logs containing access decisions stored?

  • A. Hypervisor transport node
  • B. NSX API
  • C. NSX Edge
  • D. NSX Manager

Answer: D

 

NEW QUESTION 36
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:

Which two commands must be executed to check BGP neighbor status? (Choose two.)

  • A. sa-nsxedge-01(tier0_sr)> get bgp neighbor
  • B. sa-nsxedge-01(tier0_dr)> get bgp neighbor
  • C. sa-nsxedge-01(tier1_sr)> get bgp neighbor
  • D. vrf 1
  • E. vrf 3
  • F. vrf 4

Answer: A,E

 

NEW QUESTION 37
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?

  • A. Add partner SVMs to an edge cluster.
    "For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster."
  • B. Centralize partner SVMs in a service cluster.
  • C. Create a secondary vNIC on each quest VM for SVM communication.
  • D. Place a partner SVM on each compute cluster node.

Answer: D

 

NEW QUESTION 38
A security administrator needs to configure a firewall rule based on the domain name of a specific application. Which field in a distributed firewall rule does the administrator configure?

  • A. Service
  • B. Source
  • C. Profile
  • D. Policy

Answer: C

 

NEW QUESTION 39
Which three can an administrator define in a transport node profile? (Choose three.)

  • A. Uplink Profile
  • B. Segment Profile
  • C. Logical Router
  • D. N-VDS switch configuration
  • E. Segment
  • F. VDS switch configuration

Answer: A,D,F

 

NEW QUESTION 40
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4

Answer: A,B

 

NEW QUESTION 41
Which network virtualization technologies can be used with an Ethernet VPN (EVPN) deployment in NSX-T Data Center? (Choose two.)

  • A. Multiprotocol Border Gateway Protocol (MP-BGP)
  • B. Virtual Extensible Local Area Network (VXLAN)
  • C. Open Shortest Path First (OSPF)
  • D. Virtual Routing and Forwarding (VRF)
  • E. Multiprotocol Label Switching (MPLS)

Answer: B,D

 

NEW QUESTION 42
Which three steps must be carried out to configure North-South / East-West Network Inspection? (Choose three.)

  • A. Service Introspection
  • B. Service Insertion
  • C. Service Registration
  • D. Service Deployment
  • E. Service Consumption

Answer: A,B,D

 

NEW QUESTION 43
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?

  • A. ipconfig
  • B. tcpdump
  • C. ifconfig
  • D. debug

Answer: C

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-

 

NEW QUESTION 44
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

  • A. GROUPING
  • B. MONITORING
  • C. FABRIC
  • D. SYSTEM

Answer: C

Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

 

NEW QUESTION 45
Which two tools are used to configure centralized logging in NSX-T Data Center? (Choose two.)

  • A. vRealize Operations
  • B. Syslog Server
  • C. vRealize Automation
  • D. vRealize Log Insight
  • E. vRealize Network Insight

Answer: B,D

 

NEW QUESTION 46
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)

  • A. vSphere Distributed Switch 7.0
  • B. MTU 1600
  • C. MTU 1500
  • D. MTU 1400
  • E. vSphere Distributed Switch 6.5

Answer: A,B

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-BA34FB2A-6780-41C5-B895

 

NEW QUESTION 47
......


How much Professional VMware NSX-T Data Center 2V0-41.20 Exam Cost

The registration fee for the Professional VMware NSX-T Data Center 2V0-41.20 Exam is USD $250. Refer to the VMware Website for more information as pricing may vary country wise.

 

Prepare For The 2V0-41.20 Question Papers In Advance: https://www.testsdumps.com/2V0-41.20_real-exam-dumps.html

Released VMware 2V0-41.20 Updated Questions PDF: https://drive.google.com/open?id=1K1CxN7xQoB0Mm81urg50FKLdua-h5CZF