Real PMI-PBA are Uploaded by TestsDumps provide 2021 Latest PMI-PBA Practice Tests Dumps.
All PMI-PBA Dumps and PMI Professional in Business Analysis (PMI-PBA) Training Courses Help candidates to study and pass the PMI Professional in Business Analysis (PMI-PBA) Exams hassle-free!
NEW QUESTION 39
What should be done to ensure that the product design meets the stated requirements?
- A. Conduct multiple internal design reviews.
- B. Use a traceability matrix.
- C. Engage an experienced development team.
- D. Review lessons learned results.
Answer: B
NEW QUESTION 40
The business analyst is in the process of implementing a solution for a customer. The team is having difficulty confirming if certain requirements have been met.
What could have caused this issue?
- A. The test engineer has not properly communicated requirements to the team.
- B. Acceptance criteria for the requirements were not measurable.
- C. Not all stakeholders were involved during requirements elicitation.
- D. Requirements were not adequately reviewed with the project sponsor.
Answer: B
NEW QUESTION 41
The technology department identified a defect in the company's software, which leads to an increase in human resource requirements to perform manual transactions as a workaround for tasks that should have been automated. The company begins losing money, so it hires a business analyst to produce a business case that outlines the problem/opportunity, potential options, and a recommendation for how to proceed.
Which of the following analyses must the business analyst perform in order to complete the business case and arrive at a solid recommendation"?
- A. Risk
- B. SWOT
- C. Cost-benefit
- D. Gap
Answer: C
NEW QUESTION 42
- A. RACI chart
- B. Use cases
- C. Delphi outcome
- D. They are having difficulty determining if the test results meet the project needs.
Which project artifact could the test team review to help identify acceptance criteria? - E. Project scope
Answer: E
NEW QUESTION 43
A business analyst is attempting to elicit requirements on a current project. The business subject matter experts (SMEs) from various departments in the company question how the solution will work with their various systems.
Which modeling technique should the business analyst use to depict how the solution will work with all of the company's systems?
- A. Data modeling
- B. Enterprise modeling
- C. Rules modeling
- D. Interface modeling
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 44
Which document best provides the boundaries for product development?
- A. Requirements baseline
- B. Scope document
- C. Project plan
- D. Scope definition
Answer: B
Explanation:
Explanation/Reference: https://www.pumpsandsystems.com/general-scope-document-project-boundaries
NEW QUESTION 45
A national company with offices in every state in the country has deployed a solution to allow employees to view their health benefits online. The business analyst on the project team is validating solution results to assess whether or not the solution has achieved the desired business result.
Which is the best technique to gather information from employees regarding their satisfaction with the solution?
- A. Organization modeling
- B. Focus groups
- C. Interface analysis
- D. Survey
Answer: D
NEW QUESTION 46
A business analyst has been asked to investigate a problem. This investigation will provide input towards developing a business case. The business analyst wants to first understand the company's current business processes.
Which technique should the business analyst use?
- A. MoSCoW
- B. User stories
- C. Observation
- D. RACI matrix
Answer: B
NEW QUESTION 47
After a project was delivered, the business analyst learns of a project objective with no associated requirement.
What would have helped determine this issue before delivery?
- A. Use cases
- B. Context diagram
- C. Tracing requirements
- D. Process flow
Answer: C
Explanation:
Explanation/Reference: https://www.pmi.org/learning/library/top-five-causes-scope-creep-6675
NEW QUESTION 48
While preparing a business case, an experienced business analyst faces difficulty in deciding which of three different solution options to recommend. The senior vice president (SVP) who requested the business case favors an outsourced solution; however, an analysis favors a custom-developed solution, either but internally or using contract labor.
To prepare the recommendation, what should the business analyst do?
- A. Recommend the SVP's choice, as it is most likely to be adopted.
- B. Perform solution evaluation.
- C. Review the stakeholder analysis
- D. Formulate a weighted-ranking matrix.
Answer: D
Explanation:
Explanation/Reference: https://www.forum.izenbridge.com/viewtopic.php?t=4166
NEW QUESTION 49
In the middle of a project, a new requirement was added to the scope. The business analyst must determine if any impacts, dependencies, or risks are associated with the addition to the scope.
What task should the business analyst perform in order to identify these impacts?
- A. Manage solution scope.
- B. Manage requirements traceability.
- C. Manage requirements prioritization.
- D. Manage assumptions and constraints.
Answer: A
NEW QUESTION 50
A sponsor requests a new requirement The business analyst explains that most of the information needed for this requirement does not exist and that the requirement cannot be implemented. The business analyst recommends deferring the requirement until the needed information is available and then adding it to a subsequent project The sponsor agrees.
What should the business analyst do next?
- A. Bring the subsequent project to the change control board (CCB).
- B. Ask the stakeholders to review the requirement before any other action is taken.
- C. Communicate that the status of this requirement has changed.
- D. Mark the requirement as complete so that it is not forgotten.
Answer: B
NEW QUESTION 51
A business analyst is working on a highly complex project and has elicited a large number of requirements from stakeholders in several departments Due to the large number of requirements, the stakeholders have determined that they would like to prioritize them to minimize a potentially large scope.
Which technique could the business analyst use to manage requirements?
- A. RACI models
- B. Storyboarding
- C. SMART goals
- D. MoSCoW
Answer: D
NEW QUESTION 52 
Which solution should be chosen according to the completed weighted-ranking matrix?
- A. Develop in-house software.
- B. Enhance the existing system.
- C. Outsource the development.
- D. Purchase off-the-shelf software.
Answer: C
NEW QUESTION 53
A business analyst is working with the project manager, company auditors, and project stakeholders to determine whether formal signoff should be required for the project. For which reason would the business analyst recommend formal signoff to the group?
- A. Errors in the product could result in financial solvency.
- B. The organization follows an iterative project life cycle.
- C. The project impact is contained within a small department of the company.
- D. The industry is unregulated.
Answer: D
NEW QUESTION 54
A new business analyst has taken over on a project that is in the development phase. The project manager is looking for an update on requirements status. What should the business analyst use to help communicate the status?
- A. Communication plan
- B. Project charter
- C. Traceability matrix
- D. Business analysis plan
Answer: A
NEW QUESTION 55
A project team has been assembled to reduce production costs. The business analyst is working with the project team to review and approve requirements. A stakeholder from the assembly line area has an issue with one of the requirements since it is dependent on using existing equipment that is set to be retired within the next six months.
Which of these techniques would the business analyst use to manage issues identified by stakeholders with requirements to ensure that those issues are resolved?
- A. Process modeling
- B. Problem tracking
- C. Interviews
- D. Estimation
Answer: B
NEW QUESTION 56
A company wants to improve the service to its customers by reducing complaint response time by 40%. To achieve this goal, it is necessary to redesign and optimize their internal processes and support it with a new product. The client thinks that disruption and short-term loss of productivity is inevitable.
Where can the business analyst best reflect the intangible costs associated with this change?
- A. In the pay-back analysis
- B. In the balanced score card chart
- C. In the business case
- D. In the requirements specification document
Answer: C
NEW QUESTION 57
A business analyst is attempting to elicit requirements on a current project. The business subject matter experts (SMEs) from various departments in the company question how the solution will work with their various systems.
Which modeling technique should the business analyst use to depict how the solution will work with all of the company's systems?
- A. Data modeling
- B. Interface modeling
- C. Enterprise modeling
- D. Rules modeling
Answer: B
NEW QUESTION 58
Several interviews with stakeholders to develop an inventory management system in a new architectural environment have revealed a significant concern about system and architectural stability. In which tool should the business analyst include this attribute to ensure that the requirement meets the acceptance criteria?
- A. Process modeling
- B. Stakeholder satisfaction survey
- C. Interface analysis
- D. Traceability matrix
Answer: C
Explanation:
Explanation/Reference: https://www.businessanalystlearnings.com/ba-techniques/2014/5/31/interface-analysis
NEW QUESTION 59
The business analyst has worked with the stakeholders to capture their views of organizational improvement for the company. It would be best to align these with the:
- A. vision/scope document
- B. requirements traceability matrix
- C. work breakdown structure
- D. project charter
Answer: A
NEW QUESTION 60
......
Valid Way To Pass PMI's PMI-PBA Exam with : https://www.testsdumps.com/PMI-PBA_real-exam-dumps.html
Free Test Engine For PMI Professional in Business Analysis (PMI-PBA) Certification Exams: https://drive.google.com/open?id=13Ize3HWQv08jXFv05uBlnsbYfYkBBVvB
