[Feb-2024] Dumps Brief Outline Of The 200-301 Exam - TestsDumps
200-301 Training & Certification Get Latest CCNA
To prepare for the Cisco 200-301 exam, candidates can take advantage of various resources, including Cisco’s official study materials, online courses, and practice exams. Candidates can also participate in study groups and online forums to discuss exam topics with other candidates and industry professionals. Hands-on experience with networking technologies and concepts is also a valuable asset when preparing for the exam.
NEW QUESTION # 191
Refer to the exhibit.
PC A is communicating with another device at IP address 10.227.225.255. Through which router does router Y route the traffic?
- A. router A
- B. router C
- C. router B
- D. router D
Answer: B
NEW QUESTION # 192
Drag and Drop Question
Drag and drop the AAA terms from the left onto the descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 193
Refer to the exhibit.
Packets received by the router from BGP enter via a serial interface at 209 165 201 1 Each route is present within the routing table Which interface is used to forward traffic with a destination IP of 10.1.1.19?
- A. F0/3
- B. F0/4
- C. F0/1
- D. F0/0
Answer: D
NEW QUESTION # 194
You are implementing WAN access for an enterprise network while running applications that require a fully meshed network, which two design standards are appropriate for such an environment? (choose two)
- A. multiple MPLS VPN connections with dynamic routing
- B. a collapsed core and distribution layer, to minimize costs
- C. a collapsed DMVPN solution, to simplify connectivity for the enterprise
- D. a collapsed WAN distribution layer, to consolidate connectivity to remote sites
- E. multiple MPLS VPN connections with static routing
Answer: A,C
NEW QUESTION # 195
Refer to the exhibit.
A network engineer must configure router R1 with a host route to the server. Which command must the engineer configure?
- A. R1(config)#ip route 192.168.0.2 255.255.255.255 10.10.10.10
- B. R1(conftg)#lp route 10.10.10.0 255.255.255.0 192.168.0.2
- C. R1(Config)#lp route 10.10.10.10 265.255.255.255 192 168.0.2
- D. R1(config)3|p route 0.0.0.0 0.0 0.0 192 168.0.2
Answer: C
NEW QUESTION # 196
Which IPv6 header field is equivalent to the TTL?
- A. Scan Timer
- B. Hop Count
- C. Flow Label
- D. TTD
- E. Hop Limit
Answer: E
NEW QUESTION # 197
which command can you enter on a Cisco IOS device to enable a scheduled algorithm that directs lookup calls to multiple DNS hosts?
- A. ip name-server 192.168.10.14 192.168.10.15
- B. ip domain lookup
- C. ip domain list
- D. ip domain round-robin
Answer: A
NEW QUESTION # 198
A network engineer is configuring an OSPFv2 neighbor adjacency Drag and drop the parameters from the left onto their required categories on the right. Not all parameters are used
Answer:
Explanation:
NEW QUESTION # 199
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
Answer:
Explanation:
NEW QUESTION # 200
Which resource is able to be shared among virtual machines deployed on the same physical server?
- A. VM configuration file
- B. applications
- C. operating system
- D. disk
Answer: D
NEW QUESTION # 201
Drag and drop to the characteristics of networking from the left onto the correct networking types on the right.
Answer:
Explanation:
NEW QUESTION # 202
Refer to the exhibit.
Which command configures OSPF on the point-to-point link between routers R1 and R2?
- A. router-id 10.0.0.15
- B. neighbor 10.1.2.0 cost 180
- C. network 10.0.0.0 0.0.0.255 area 0
- D. ipospf priority 100
Answer: C
NEW QUESTION # 203
Refer to the exhibit.
Which password must an engineer use to enter the enable mode?
- A. default
- B. testing 1234
- C. cisco123
- D. adminadmin123
Answer: B
NEW QUESTION # 204
Refer to the exhibit.
An engineer booted a new switch and applied this configuration via the console port. Which additional configuration must be applied to allow administrators to authenticate directly to enable privilege mode via Telnet using a local username and password?
- A. Option C
- B. Option B
- C. Option D
- D. Option A
Answer: D
NEW QUESTION # 205
Refer to the exhibit.
A newly configured PC fails to connect to the internet using TCP port 80 to www cisco com Which setting must be modified for the connection to work?
- A. Subnet Mask
- B. DNS Servers
- C. Default Gateway
- D. DHCP Server
Answer: B
NEW QUESTION # 206
Which two statements about RIPv2 are true? (Choose two)
- A. It stores RIP neighbor adjacency information in a neighbor table.
- B. It sends periodic updates via broadcast
- C. It uses the Bellman-Ford routing algorithm
- D. It does not support clear text authentication, similar to RIPv1.
- E. It supports CIDR and VLSM
Answer: A,C
NEW QUESTION # 207
Drag and drop the descriptions from the left onto the configuration-management technologies on the right.
Answer:
Explanation:
Explanation
Ansible:- uses SSH for remote device communication- uses YAML for fundamental configuration elements Chef:- uses TCP port 10002 for configuration push jobs- uses Ruby for fundamental configuration elements Puppet:- fundamental configuration elements are stored in a manifest- uses TCP 8140 for communication The focus of Ansible is to be streamlined and fast, and to require no node agent installation.Thus, Ansible performs all functions over SSH. Ansible is built on Python, in contrast to the Ruby foundation of Puppet and Chef.TCP port 10002 is the command port. It may be configured in the Chef Push Jobs configuration file .This port allows Chef Push Jobs clients to communicate with the Chef Push Jobs server.Puppet is an open-source configuration management solution, which is built with Ruby and offers custom Domain Specific Language (DSL) and Embedded Ruby (ERB) templates to create custom Puppet language files, offering a declarative-paradigm programming approach.A Puppet piece of code is called a manifest, and is a file with .pp extension.
NEW QUESTION # 208
Refer to the exhibit.
The nip server 192.168.0.3 command has been configured on router 1 to make it an NTP client of router 2.
Which command must be configured on router 2 so that it operates in server-only mode and relies only on its internal clock?
- A. Router2(config)#ntp server 172.17.0.1
- B. Router2(config)#ntp passive
- C. Router2(config)#ntp master 4
- D. Router2(config)#ntp server 192.168.0.2
Answer: D
NEW QUESTION # 209
Why will a switch never learn a broadcast address?
- A. A broadcast frame is never forwarded by a switch.
- B. Broadcasts only use network layer addressing.
- C. Broadcast addresses use an incorrect format for the switching table.
- D. Broadcast frames are never sent to swiches.
- E. A broadcast address will never be the source address of a frame.
Answer: E
NEW QUESTION # 210
Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right
Answer:
Explanation:
NEW QUESTION # 211 
Refer to the exhibit. An engineer must add a subnet for a new office that will add 20 users to the network.
Which IPv4 network and subnet mask combination does the engineer assign to minimize wasting addresses?
- A. 10.10.225.48 255.255.255.224
- B. 10.10.225.32 255.255.255.240
- C. 10.10.225.48 255.255.255.240
- D. 10.10.225.32 255.255.255.224
Answer: D
NEW QUESTION # 212
Which command should you enter to verify the priority of a router in an HSRP group?
- A. show sessions
- B. show interfaces
- C. show hsrp
- D. show standby
Answer: D
Explanation:
The following is sample output from the show standby command:
NEW QUESTION # 213
......
Cisco 200-301 certification exam is an entry-level exam that tests the knowledge and skills of professionals in the field of network engineering. Cisco Certified Network Associate Exam certification is designed to validate the candidate's knowledge and understanding of basic networking concepts, including network access, IP connectivity, IP services, security fundamentals, and automation and programmability. The Cisco 200-301 certification exam is essential for anyone who wishes to start a career in the field of networking.
Passing the Cisco 200-301 exam is a significant achievement for any network engineer or technician. Not only does it validate their skills and knowledge in the field, but it also opens up new job opportunities and career paths. Employers in the IT industry often look for candidates who have a CCNA certification as it demonstrates their commitment to the field and their ability to work with complex network infrastructure.
Certification Training for 200-301 Exam Dumps Test Engine: https://www.testsdumps.com/200-301_real-exam-dumps.html
CCNA 200-301 Real Exam Questions and Answers FREE Updated: https://drive.google.com/open?id=1DLs8UEg3G4HoGhgB5XGsg8kOatfvKiOP
