Nov-2023 Realistic 200-301 Accurate & Verified Answers As Experienced in the Actual Test!
Latest Cisco 200-301 Practice Test Questions, Cisco Certified Network Associate Exam Exam Dumps
Cisco 200-301 exam is a 120-minute test that consists of 100-120 questions. 200-301 exam covers a wide range of topics, including network fundamentals, network access, IP connectivity, IP services, security fundamentals, automation, and programmability. 200-301 exam is available in English and Japanese, and the passing score is 825 out of 1000.
NEW QUESTION # 434
Which 802.11 frame type is indicated by a probe response after a client sends a probe request?
- A. action
- B. data
- C. control
- D. management
Answer: D
NEW QUESTION # 435
Refer to Exhibit.
Refer to the exhibit. An engineer must add a subnet for a new office that will add 20 users to the network. Which IPv4 network and subnet mask combination does the engineer assign to minimize wasting addresses?
- A. 10.10.225.32 255.255.255.224
- B. 10.10.225.32 255.255.255.240
- C. 10.10.225.48 255.255.255.240
- D. 10.10.225.48 255.255.255.224
Answer: A
NEW QUESTION # 436
Refer to the exhibit.
What action establishes the OSPF neighbor relationship without forming an adjacency?
- A. modify network type
- B. modify priority
- C. modify process ID
- D. modify hello interval
Answer: D
NEW QUESTION # 437
Refer to the exhibit.
The network administrator wants VLAN 67 traffic to be untagged between Switch 1 and Switch 2 while all other VLANs are to remain tagged.
Which command accomplishes this task?
- A. switchport access vlan 67
- B. switchport trunk allowed vlan 67
- C. switchport private-vlan association host 67
- D. switchport trunk native vlan 67
Answer: D
NEW QUESTION # 438
Refer to the exhibit.
A network administrator must permit SSH access to remotely manage routers in a network. The operations team resides on the 10.20.1.0/25 network. Which command will accomplish this task?
- A. no access-list 2699 deny tcp any 10.20.1.0 0.0.0.127 eq 22
- B. access-list 2699 permit tcp any 10.20.1.0 0.0.0.255 eq 22
- C. access-list 2699 permit udp 10.20.1.0 0.0.0.255
- D. no access-list 2699 deny ip any 10.20.1.0 0.0.0.255
Answer: D
Explanation:
Note : Already a statement is there in last to allow SSH Traffic for network 10.20.1.0 0.0.0.127, but Second statement says deny ip any 10.20.1.0 0.0.0.255, so how it will work once it is denied. So the right answer is remove the --- no access-list 2699 deny ip any 10.20.1.0 0.0.0.255.
NEW QUESTION # 439
Refer to the exhibit. The given Windows PC is requesting the IP address of the host at www.cisco.com. To which IP address is the request sent?
- A. 192.168.1.226
- B. 192.168.1.253
- C. 192.168.1.100
- D. 192.168.1.254
Answer: B
Explanation:
Send for DNS serve, because url should be translate to IP address.
NEW QUESTION # 440
Drag the descriptions of device management from the left onto the types of device management on the right.
Answer:
Explanation:
Explanation
Cisco DNA Center Device Management
3. Monitor the cloud for software update
5. Uses CLI templates to apply a consistent configuration to multiple devices at an individual location
6. Uses NetFlow to analyse potential security threats throughout the network and take appropriate action on that traffic Traditional device management
2. Manages device configuration on a per-device basis
4. Security is managed near the perimeter of the network with firewalls, VPNs, and IPS
* Implements changes via an SSH terminal
NEW QUESTION # 441
A router running EIGRP has learned the same route from two different paths Which parameter does the router use to select the best path?
- A. metric
- B. cost
- C. as-path
- D. adminstrative distance
Answer: A
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric. For example, RIP uses hop counts as a metric, while OSPF uses cost.
NEW QUESTION # 442
Which two practices are recommended for an acceptable security posture in a network? (Choose two)
- A. Backup device configurations to encrypted USB drives for secure retrieval
- B. maintain network equipment in a secure location
- C. Use a cryptographic keychain to authenticate to network devices
- D. Disable unused or unnecessary ports, interfaces and services
- E. Place internal email and file servers in a designated DMZ
Answer: C,D
NEW QUESTION # 443
After a recent security breach and a RADIUS failure, an engineer must secure the console port of each enterprise router with a local username and password. Which configuration must the engineer apply to accomplish this task?
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: C
NEW QUESTION # 444
A frame that enters a switch fails the Frame Check Sequence. Which two interface counters are incremented?
(Choose two)
- A. CRC
- B. frame
- C. runts
- D. giants
- E. input errors
Answer: A,E
Explanation:
Explanation
Whenever the physical transmission has problems, the receiving device might receive a frame whose bits have changed values. These frames do not pass the error detection logic as implemented in the FCS field in the Ethernet trailer. The receiving device discards the frame and counts it as some kind of input error.
Cisco switches list this error as a CRC error. Cyclic redundancy check (CRC) is a term related to how the FCS math detects an error.
The "input errors" includes runts, giants, no buffer, CRC, frame, overrun, and ignored counts.
The output below show the interface counters with the "show interface s0/0/0" command:
NEW QUESTION # 445
Drag and drop the descriptions of file-transfer protocols from the left onto the correct protocols on the right.
Answer:
Explanation:
NEW QUESTION # 446
Drag and drop the functions from the left onto the correct network components on the right
Answer:
Explanation:
NEW QUESTION # 447
An engineer is configuring an encrypted password for the enable command on a router where the local user database has already been configured Drag and drop the configuration commands from the left into the correct sequence on the right Not all commands are used
Answer:
Explanation:
NEW QUESTION # 448
Refer to the exhibit.
Drag and drop the networking parameters from the left onto the correct values on the right.
Checktheanswerbelow
Below is the correct order.
Answer:
Explanation:
NEW QUESTION # 449
What is the primary function of a Layer 3 device?
- A. to transmit wireless traffic between hosts
- B. to forward traffic within the same broadcast domain
- C. to analyze traffic and drop unauthorized traffic from the Internet
- D. to pass traffic between different networks
Answer: D
Explanation:
Section: Network Fundamentals
NEW QUESTION # 450
Drag and drop the IPv4 network subnets from the left onto the correct usable host ranges on the right
Answer:
Explanation:
NEW QUESTION # 451
Refer to the exhibit. Which statement about the interface that generated the output is true?
- A. One secure MAC address is manually configured on the interface.
- B. One secure MAC address is dynamically learned on the interface.
- C. A syslog message is generated when a violation occurs.
- D. Five secure MAC addresses are dynamically learned on the interface.
Answer: A
NEW QUESTION # 452
......
Free 200-301 Exam Files Downloaded Instantly 100% Dumps & Practice Exam: https://www.testsdumps.com/200-301_real-exam-dumps.html
Nov-2023 Pass Cisco 200-301 Exam in First Attempt Easily: https://drive.google.com/open?id=1KJoI_yQcsSqoLa6GNSgc_m_QrEQAGqH2
