Get 2021 Updated Free CompTIA 220-1001 Exam Questions & Answer
220-1001 Dumps PDF and Test Engine Exam Questions
CompTIA A+ Core 1 220-1001 Exam
CompTIA A+ Core 1 220-1001 Exam is related to CompTIA A+ Certification. It validates the Candidates knowledge to install and configure PC System Unit Components and Peripheral Devices, install, configure and troubleshoot display and Multimedia devices, explain network infrastructure concepts, implement Client Virtualization, support and troubleshoot Laptops. CompTIA A+ Certified Professional usually hold or pursue this certification and you can expect the same job roles after completion of this certification.
NEW QUESTION 279
SIMULATION
You need to configure your mobile device to send and receive electronic messages from your company.
You must use the company's WLAN as all e-mail services are on default non-secure ports.
The company's WLAN is broadcasting across the company for easier access.
Users must authenticate to the server with the same credentials in order to send and receive email.
Authentication should be enforced in the settings of the mobile device using the following parameters:
Username: [email protected]
Password: P@$$w0rd
Outgoing server: mail.techies.com
Incoming server: pop3.techies.com
Company SSID: Techies
Security Key: CA:FE:33:71:00
INSTRUCTIONS:
Update the mobile device's parameters to fit the criteria and support the strongest encryption available.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
- A. For the WiFi setup, do the following:
1. Enable 802.11 b/g Radio
2. Choose the Techies SSID, enter the CA:FE:33:71:00 security Key.
3. Choose the "Same as Incoming Server" option below.
For Email setup, choose the following:
- B. For the WiFi setup, do the following:
1. Enable 802.11 b/g Radio
2. Choose the Techies SSID, enter the CA:FE:33:71:00 security Key.
3. Choose the "Same as Incoming Server" option below.
For Email setup, choose the following:
Answer: A
NEW QUESTION 280
A technician has assembled an ITX system with a modern processor, but the machine does not POST. The processor fan spins up, and the LEDs on the motherboard light up, but no beeps are emitted by the system.
Which of the following is the MOST likely cause of this issue?
- A. An incompatible NVMe SSD is installed.
- B. An incompatible memory type is installed.
- C. A faulty hard drive is installed.
- D. The wrong generation CPU is installed.
Answer: C
NEW QUESTION 281
Which of the following server types caches previously visited web pages for faster access in the future?
- A. Web hosting server
- B. Proxy server
- C. Branch cache server
- D. DNS server
Answer: D
NEW QUESTION 282
A server administrator set up a VM to be used in a lab setting. A technician is setting up thin-client
computers to access this VM. Which of the following tasks are required to complete the project? (Choose
three.)
- A. Install a USB keyboard and mouse.
- B. Install the latest device drivers.
- C. Install the latest system updates.
- D. Connect the device to a monitor.
- E. Connect the device to a printer.
- F. Install the operating system.
- G. Install the necessary applications.
- H. Connect the device to the network.
Answer: C,G,H
Explanation:
Explanation/Reference:
NEW QUESTION 283
A user reports paper output from a printer has toner that is not sticking to the page. The output smears when it is touched. A technician notes the appropriate paper is being used. The toner appears to be low but is a supported OEM cartridge. Which of the following would MOST likely fix this issue?
- A. Replace the developer roll.
- B. Replace the toner.
- C. Replace the drum.
- D. Replace the fuser.
- E. Find and remove any jammed paper.
Answer: D
NEW QUESTION 284
A systems administrator receives a notification from the RAID controller that the RAID 5 array is degraded.
Upon logging into the server, the administrator sees that on local disk 0, physical disk 2 has failed. Which of the following is the BEST course of action to take to resolve the problem?
- A. Delete logical disk 0 and manually configure a new RAID array only using the known-good working drives.
Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded. - B. In the controller, convert the RAID 5 array to RAID 0 array to avoid system downtime. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded.
- C. Immediately replace physical disk 2. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded.
- D. Schedule system downtime and replace physical disk 2. Wait until the array is rebuilt and confirm in the RAID controller that the system is no longer degraded.
Answer: D
NEW QUESTION 285
A technician needs to set up a desktop so a programmer can write applications for mobile operating systems.
This will require the installation of:
- A. mobile device management
- B. a Trusted Platform Module
- C. emulator software
- D. a CPU that supports hyperthreading
Answer: C
NEW QUESTION 286
A network administrator is attempting to access the firewall while inside the datacenter. Which of the following peripherals must be connected to do so?
- A. Keyboard
- B. Mouse
- C. KVM
- D. Touchpad
Answer: C
NEW QUESTION 287
A technician for a cable provider is setting up high-speed Internet service at a residential customer's home. The type of cabling the technician will use to connect from the outside pole into the customer's home is MOST likely:
- A. Cat 5e
- B. STP
- C. plenum
- D. coaxial
Answer: C
NEW QUESTION 288
An end user has signed up to use a web-based calendar application. Which of the following solutions has the user purchased?
- A. DaaS
- B. SaaS
- C. laaS
- D. PaaS
Answer: B
NEW QUESTION 289
A technician is setting up a multifunction printer in an enterprise Users of this device regulatory print documents containing PII. Which of the following settings has the GREATEST security implications for the technician to consider?
- A. Network sharing
- B. Hard drive caching
- C. AirPrint
- D. Bluetooth settings
Answer: A
NEW QUESTION 290
A technician is configuring a new web server and must have over 10TB of fault-tolerant storage, while minimizing the number of failure points. The applications on the server also require the highest performance available. Which of the following configurations would the technician MOST likely select?
- A. RAID 1 with 10000rpm 8TB drives
- B. RAID 0 with 15000rpm 15TB drives
- C. RAID 10 with 5400rpm 6TB drives
- D. RAID 5 with 7200rpm 5TB drives
Answer: C
Explanation:
Explanation/Reference:
NEW QUESTION 291
A customer wants to purchase a new home computer. The machine will mainly be used for internal browsing and streaming video, except on weekends when the customers' son will use it to play games with friends.
Which of the following should the technician focus on to meet these requirements?
- A. 80mm case fans
- B. Dual monitors
- C. Encrypted hard drive
- D. RAID 5 array
- E. Four-core processor
- F. 16GB DDR2 memory
Answer: E,F
NEW QUESTION 292
A technician is upgrading the memory in a workstation. While the case is open the technician cleans out all the dust that has accumulated around the components The technician installs the memory and then attempts to boot the system, but the system gets stuck while displaying the following message Boot media not found Which of the following will MOST likely fix the issue and allow the system to boot properly?
- A. Reseat the hard drive cables
- B. Reapply thermal paste to the CPU.
- C. Remove the new memory modules
- D. Replace the graphics card
Answer: A
NEW QUESTION 293
Some users are unable to access the Internet form their workstations. A technician runs the ipconfig command on one of the workstations and sees the following:
The technician pings 8.8.8.8 and gets no response. Next, the technician pings 192.168.1.1 and gets no response. The technician is able to successfully ping an adjacent workstation but cannot ping the print server on the floor below. Which of the following is the MOST likely cause of the Internet connectivity issue in the office?
- A. There is a problem with a DNS server in the office
- B. There is a problem with a router in the office
- C. The users are not getting correct IP addresses from the DHCP server
- D. The wireless access point in the area is down
Answer: B
NEW QUESTION 294
A technician is buying a PC that will host three VMs running at the same time with the current configuration. The technician believes there might be a need to run several additional VMs in the near future. Which of the following resources would be the MOST important to upgrade to allow for the additional VMs?
- A. RAM
- B. SSD
- C. NIC
- D. CPU
Answer: B
NEW QUESTION 295
A customer is purchasing a gaming laptop and wants the maximum number of IOPS. Which of the following hard drives should be installed in the laptop?
- A. Hybrid SSD
- B. SATA SSD
- C. IDE SSD
- D. NVMe SSD
Answer: B
NEW QUESTION 296
A developer wants to add a Windows 10 64-bit VM with the minimum system requirements to a virtual host workstation. The virtual host is running Windows Server 2008 R2 and has 24GB of RAM, a 1TB hard drive, and a Gigabit Ethernet NIC with Cat Se cabling. The current configuration of VMs is as follows:
Windows 7 VM with 4GB RAM and 200GB HOD
Linux VM with 16GB RAM and 200GB HDD
Linux VM with 2GB RAM and 100GB HDD
Which of the following should the technician recommend to the developer FIRST?
- A. Install an additional NIC and configure teaming.
- B. Upgrade the network cabling to Cat 6.
- C. Increase the memory in the virtual host.
- D. Increase the HDO in the virtual host.
Answer: C
NEW QUESTION 297
A user is accessing webmail and needs to encrypt the contents of the email message and attachments prior to sending. Which of the following should be configured to accomplish this task?
- A. VPN settings
- B. TLS settings
- C. SSL settings
- D. S/MIME settings
Answer: D
NEW QUESTION 298
A laptop is connected to a conference room projector in extended display mode. The desktop icons appear normal on the laptop, but are disproportionate and illegible on the projector screen.
Which of the following should the technician check?
- A. Video resolution
- B. Focus
- C. HDMI connection
- D. Keystone
Answer: A
NEW QUESTION 299
A technician is building a new PC and needs !o install RAM. The motherboard has four slots, which are grouped in pairs. Which of the following types of RAM would be MOST appropriate'?
- A. Dual channel
- B. Single channel
- C. Triple channel
- D. Quad channel
Answer: A
NEW QUESTION 300
A user cannot connect a mobile device to the Internet via WiFi when at home, but WiFi on the mobile device works fine when the user is at the office. The user recently installed a new router at home and used the same SSID from the old router to set up the new router. Which of the following MOST likely describes the issue with the device?
- A. The device is in airplane mode when the user is at home.
- B. The old network must be forgotten, and the settings need to be reconfigured.
- C. The device needs to have Bluetooth enabled to connect wirelessly to the router
- D. The device has a hardware issue and cannot connect to the home network.
Answer: B
NEW QUESTION 301
Laura, a customer, has instructed you to configure her home office wireless access point.
She plans to use the wireless network for finances and has requested that the network be setup with the highest encryption possible.
Additionally, Laura knows that her neighbors have wireless networks and wants to ensure that her network is not being interfered with by the other networks.
She requests that the default settings be changed to the following.
Wireless Name: HomeWiFi
Shared Key: CompTIA
Router Password: Secure$1
Finally, Laura wants to ensure that only her laptop and Smartphone can connect to the network.
Laptop: IP Address 192.168.1.100
Hardware Address: 00:0A:BF:03:C4:54
Smartphone: IP Address 192.168.1.101
Hardware Address: 09:2C:D0:22:3F:11
INSTRUCTIONS
Configure Laura's wireless network using the network adapter window.
If at any time you would like to bring back the initial state of the situation, please click the Reset All button.
Answer:
Explanation:
See the explanation below
Explanation
solution as
NEW QUESTION 302
......
CompTIA 220-1001: Potential candidates and recommended experience
The 220-1001 certification exam is aimed at those individuals entering the IT industry. These are people who are new to technology and want to gain the basic skills that will help them get a great start in their careers. The applicants planning to sit for this test must have up to 1 year of experience working in the field or lab, but not less than 9 months.
Verified 220-1001 exam dumps Q&As with Correct 710 Questions and Answers: https://www.testsdumps.com/220-1001_real-exam-dumps.html
Get New 220-1001 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1_1pw9A5Z6hviCxAukBP_TyNuM9b_HJEm
