[Jul 29, 2023] Pass CompTIA 220-1001 Exam Info and Free Practice Test
220-1001 Exam Dumps PDF Updated Dump from TestsDumps Guaranteed Success
Certification Path
The CompTIA A+ Core 1 certification includes only one 220-1001 certification exam.
NEW QUESTION # 235
A technician is implementing a virtual lest environment for a lab and needs to fulfill the following requirements:
* All instances must have a single virtual processor
* All instances must not be able to access the Internet.
* All instances must be able to talk to other instances to test application communications.
Which of the following must the technician also consider when implementing this configuration? (Select THREE).
- A. User requirements
- B. Hardware requirements
- C. Resource requirements
- D. Emulator requirements
- E. Hypervisor requirements
- F. Performance requirements
- G. Security requirements
- H. Network requirements
Answer: D,F,H
NEW QUESTION # 236
Which of the following server types should be used to process outside authentication requests?
- A. RADIUS
- B. DNS
- C. Proxy
- D. Web
Answer: A
NEW QUESTION # 237
After setting up a DHCP server and a DNS server a technician would like to centralize all of the events generated by the two servers so they can be viewed in one dashboard. Which of the following is a data source used to populate the dashboard?
- A. Perfmon
- B. Syslog
- C. Host file
- D. Netstat
Answer: C
NEW QUESTION # 238
A technician is configuring a new web server and must have over 10TB of fault-tolerant storage, while minimizing the number of failure points. The applications on the server also require the highest performance available. Which of the following configurations would the technician MOST likely select?
- A. RAID 5 with 7200rpm 5TB drives
- B. RAID 1 with 1000rpm 8TB drives
- C. RAID 10 with 5400rpm 6TB drives
- D. RAID 0 with 1500rpm 15TB drives
Answer: C
NEW QUESTION # 239
A technician is replacing the monitor on a PC. The new monitor has the same screen resolution as the previous one, but it is a different model. When the new monitor is turned on, the icons are displayed very largely. Which of the following should the technician do FIRST to troubleshoot issue.?
- A. Restart the desktop.
- B. Update the video drivers
- C. Replace the VGA cable
- D. Replace the video card.
Answer: B
NEW QUESTION # 240
A technician Is troubleshooting a corporate Windows PC that has a distorted image on the monitor. The user states the PC was working fine yesterday. Other computers are having the same Issue. Which of the following should the technician do FIRST?
- A. Ask the users to reboot their computers to see If the problem clears.
- B. Update the graphic drivers to the latest version.
- C. Check the BIOS firmware revision level.
- D. Check with the IT department to see If any updates were pushed out.
Answer: D
NEW QUESTION # 241
A technician Is building out a small retail shop. The owner wants an the cash registers to remote Into a server in the back of the shop rather than running an OS locally. Which of the following should the technician install for the registers?
- A. Touch screen kiosks
- B. Portable mobile devices
- C. Laptops with docking stations
- D. Thin clients
Answer: C
NEW QUESTION # 242
SIMULATION
You need to configure your mobile device to send and receive electronic messages from your company.
You must use the company's WLAN as all e-mail services are on default non-secure ports.
The company's WLAN is broadcasting across the company for easier access.
Users must authenticate to the server with the same credentials in order to send and receive email.
Authentication should be enforced in the settings of the mobile device using the following parameters:
* Username: [email protected]
* Password: P@$$w0rd
* Outgoing server: mail.techies.com
* Incoming server: pop3.techies.com
* Company SSID: Techies
* Security Key: CA:FE:33:71:00
INSTRUCTIONS:
Update the mobile device's parameters to fit the criteria and support the strongest encryption available.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
- A. For the WiFi setup, do the following:
1. Enable 802.11 b/g Radio
2. Choose the Techies SSID, enter the CA:FE:33:71:00 security Key.
3. Choose the "Same as Incoming Server" option below.
For Email setup, choose the following:
- B. For the WiFi setup, do the following:
1. Enable 802.11 b/g Radio
2. Choose the Techies SSID, enter the CA:FE:33:71:00 security Key.
3. Choose the "Same as Incoming Server" option below.
For Email setup, choose the following:
Answer: A
NEW QUESTION # 243
A technician is configuring the gateway router at a satellite office. The router must receive a network address automatically from the ISP and assign local private addresses to network devices in the office. Which of the following should the technician configure to meet these requirements? (Select TWO).
- A. Static DNS on the router's WAN interface
- B. A DHCP server on the router's LAN interface
- C. The WAN interface of the router as a DHCP client
- D. Authoritative DNS on the router's LAN interface
- E. A custom VLAN assignment on the router's WAN interface
- F. Port forwarding of TCP port 53 to the router's default gateway
Answer: B,C
NEW QUESTION # 244
Which of the following cloud models places all responsibility for operating system and application maintenance on the customer?
- A. Public laaS
- B. Community SaaS
- C. Private SaaS
- D. Private PaaS
Answer: A
NEW QUESTION # 245
Which of the following Is a key benefit of elasticity in regard to cloud computing?
- A. Eliminates the need for site-to-site VPN tunnels
- B. Allows for the use of public IPv6 IP addresses
- C. Provides the ability to easily scale up/out compute resources
- D. Gives the capability to back up cloud computers
Answer: C
NEW QUESTION # 246
Employees are reporting the image on the screen in a conference room is too wide at the top and too narrow at the bottom. A technician tries to adjust the resolution but is unsuccessful. Which of the following settings should the technician adjust NEXT?
- A. Contrast
- B. Keystone
- C. Brightness
- D. Pincushion
Answer: B
NEW QUESTION # 247
A user is experiencing slow performance on a workstation. A technician Investigates and speculates the performance issue is being caused by an excessive number of background services running at startup. The technician troubleshoots the issue, and then finds and disables many services that have been running at startup. Next, the technician informs the user the remediation is complete. The following morning, the technician receives a call from the same user reporting performance is still slow. Which of the following troubleshooting steps did the technician MOST likely fall to complete?
- A. Identify the problem.
- B. Document findings, actions, and outcomes.
- C. Verify full system functionality.
- D. Establish a theory of probable cause.
Answer: C
NEW QUESTION # 248
Which of the following interfaces uses DB9 and DB25 connectors?
- A. eSATA
- B. RS-232
- C. USB
https://www.rfwireless-world.com/Terminology/RS232-interface.html - D. USB-C
Answer: B
NEW QUESTION # 249
A user is connected to a docking station with an optical drive and is trying to back up personal files to
removable media, but is encountering write errors. Which of the following is MOST likely cause of the
errors?
- A. The disk has already been finalized
- B. The files are encrypted
- C. There is a corrupt file on the hard drive
- D. The files are not compatible with the type of disk used
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION # 250
A technician purchases several monitors that are equipped with all modem video connectors. The technician wants to daisy chain these monitors together to extend the desktop of the OS. Which of the following cables would the technician MOST likely use to accomplish this?
- A. DisplayPort
- B. VGA
- C. Dv
- D. HDMI
Answer: A
Explanation:
Reference: https://www.hp.com/us-en/shop/tech-takes/how-to-daisy-chain-monitors
NEW QUESTION # 251
Which of the following connectors is oval-shaped and used to connect to mobile devices?
- A. Lightning
- B. RJ45
- C. USB-C
- D. RG-6
Answer: C
NEW QUESTION # 252
A technician has received a call about an issue with a monitor. The technician notices certain spots on the display never change color. Additionally, there is a faint image present when the display is powered on, which fades after several minutes. Which of the following symptoms is this display experiencing? (Select two.)
- A. Color patterns incorrect
- B. Burn-in
- C. Distorted geometry
- D. Dead pixels
- E. Distorted image
- F. Artifacts
Answer: B,D
NEW QUESTION # 253
......
Pass Your CompTIA Exam with 220-1001 Exam Dumps: https://www.testsdumps.com/220-1001_real-exam-dumps.html
220-1001 Exam Dumps - CompTIA Practice Test Questions: https://drive.google.com/open?id=1jNyylGss2Bdl2zuNK74pBcc4dLtn2zKS
